All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Resources - Learning Material (https://allmetalshaping.com/forumdisplay.php?f=18)
-   -   pullmax dvd by terry stolarski worth the money? (https://allmetalshaping.com/showthread.php?t=6129)

luscten 05-13-2012 08:35 PM

pullmax dvd by terry stolarski worth the money?
 
Just wanting to know if this video series is worth the money? Any feedback would be helpfull.

Randy Tait

Kerry Pinkerton 05-13-2012 09:28 PM

Yes. There are lots and lots of tricks in this series. Some of them are just now sinking in and some were 'ah-ha moments' as soon as I saw them.

HEATNBEAT 05-13-2012 09:28 PM

I bought the first one it has some great tips in it!
It has a few problems. Some drawings are to small. And at one point no video but has sound.
All in all well worth the money!:)

Joe Hartson 05-13-2012 09:53 PM

I agree that the DVDs are very good overall. All of the tricks and tips don't just jump out at you the first time you view it. The more you view them the more you learn.

rdupree 05-13-2012 10:08 PM

Unless it has been redone the first videos had some pretty lousy audio in spots. Still, WATCH the video, particularly looking at the different dies he shows as he scans his shop, and, yes, be prepared to watch it more than once to really pick up on what he is trying to show you.

longyard 05-13-2012 11:40 PM

Quote:

Originally Posted by Kerry Pinkerton (Post 54480)
Yes. There are lots and lots of tricks in this series. Some of them are just now sinking in and some were 'ah-ha moments' as soon as I saw them.


I visited his site and just ordered all four videos. Thanks for the heads up Randy and Kerry!

Barry 05-14-2012 12:24 AM

I got the first two and agree there is plenty info there. Definately worthwhile.
Issues with the quality though and I was promised another one which I never received. You're stateside though so I'm sure you won't have any issues with that.

Dale in aus 05-14-2012 12:53 AM

whats the website?

Metlmodr 05-14-2012 02:43 AM

DVD's
 
It is available from their website but it's not currently listed:

http://shapingdie.com

You can reach them at: metalworking@comcast.net

luscten 05-14-2012 07:40 PM

I email him to ask beading question and it did not go through.

Randy

Janne 02-17-2015 02:50 PM

I bought , the first series , couple years ago, or something.Couple of weeks ago, these DVD´s come to my mind again.I checked the website and it had 3 new and one for making easy beading dies..I ordered them, and got them last friday.I have been hearing pretty many hours of Pullmax noise , :lol: ..And Terry´s :)

I learned new tricks, and I think there is no part that Terry can´t do with he´s pullmax..impressive. I did not get allthings clear to my head, like was written before..but somethings, I know, I could not have invented on my own, or maybe throught many years of trial and error.

The webaddress is same , email has changed, it is now :

www.shapingdie.com

ekim651@gmail.com

dbuch 08-13-2021 11:46 PM

Terry Stolarski
 
I know this is an old thread. I too purchased these dvds - the complete set - and they are filled with a wealth of information on making and using and tuning pullmax dies. My question is: does anyone here know what ever happened to Terry Stolarski? I used to deal with his son Mike back when they had their website going, and I would from time to time buy doming dies from him. They were top quality with beautiful welds.


I have often talked with fellow metal shapers and discussed Terry's videos and recommended them - but they apparently haven't been available for at least 5 years or so now, and the website has disappeared. He also used to sell his videos and some tooling on Ebay - but again he hasn't been on there for many years.


I will appreciate any information you can provide.


Thanks,
David


All times are GMT -5. The time now is 09:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.