All MetalShaping - bomber style seat

All MetalShaping (https://allmetalshaping.com/index.php)

- Beginner Projects (https://allmetalshaping.com/forumdisplay.php?f=26)

- - bomber style seat (https://allmetalshaping.com/showthread.php?t=20257)

ian staples

01-23-2021 04:28 AM

bomber style seat

4 Attachment(s)

Hi . I always wanted to try and make a bomber seat and my latest project is a racing ride on mower so I thought I would practice on this . quite pleased with the way it turned out .Regards Ian

Attachment 58664

Attachment 58665

Attachment 58666

Attachment 58667

crystallographic

01-23-2021 10:05 AM

Quote:

Originally Posted by ian staples (Post 166850)

I sure like the looks of this one, Ian.
Nice clean work.
Wired edges are clean and even.
Not often I see binocular rivets.:):)

ian staples

01-23-2021 01:43 PM

edge

Thanks Kent . It's not a wired edge its a folded capping 6mm down the outside and 12mm on the inside. Regards Ian

crystallographic

01-23-2021 02:52 PM

Quote:

Originally Posted by ian staples (Post 166853)

Thanks Kent . It's not a wired edge its a folded capping 6mm down the outside and 12mm on the inside. Regards Ian

Aha - missed that close-up of the applied fold-over. Makes it much easier. :)

(Bit of effort working wires into full race-car seats so they look nice.....)

Gojeep

01-24-2021 04:20 AM

That came out really well. :)

Steve Hamilton

01-24-2021 12:02 PM

Hi Ian
your seat looks great!
nice attention to detail.
thanks for sharing.

Steve

cliffrod

01-27-2021 08:05 AM

Looks good, Ian. Thanks for the pics.

All times are GMT -5. The time now is 07:22 AM.