Melbourne, OZ, GT40s and MTBs
Strewth here we go.
Name - Ryan Love Age - 40s, thats enough make it stop Location, inner south eastern suburbs of Melbourne Australia Occupation, Railway Signalling Engineer. Have worked on jobs in most states of OZ but predominantly its been metro Melbourne. Hobbies and interests; Well i like riding my Mountain bike when i am able. used to race that when i was younger but realized that i didn't have what it took to get going really fast back in 2005 and haven't raced since. As a junior I raced on the road and velodrome as well. At some stage i would like to have a go at making my own bike frame but that will have to come after the current project. I have a modest shed which i am slowly over filling. Major tools in the shed; Mig welder, Lathe, Mill, Spot welder, Horizontal Bandsaw, 3d printer Current project; and predominant reason for joining this forum is a scratch built Ford GT40 replica. I started this probably 5 years back now and have slowly been collecting bits. I have the fiberglass body already and have been collecting tooling along the way to help make it. Some time back, maybe 2 years ago I acquired some copies (not all) of the original hand drawn ford blue prints. These were obviously drawn on plastic transparency sheets and show a few revisions over the time in which they were in development. dates on the drawings range between 64 and 69 i think. In the last 2 years I have been working on converting what i do have into CAD so that I can then connect the dots using details from the existing plans and photos from original cars. surprise surprise they all seem to differ slightly. If you want to see more there is more here https://www.gt40s.com/threads/ryans-...-body-5.46513/ I have been enjoying the project, the process and challenge. Most importantly i am enjoying the journey, meeting new people along the way as well as learning new skills. This is something (hands on skills) that I hope to be able to pass on to my two kids as they grow up. Cheers. Hope to meet some of you down the track. I will have a look around and see what everyone is up to. Regards Ryan https://www.gt40s.com/attachments/mo...le-jpg.110157/ |
Welcome aboard, Ryan, sounds like a fun project!
Nice chassis table build, too :) |
Thanks Dan,
Hasn's seen much use yet as that was done prior to getting the proper plans. its sitting there ready to go. I had a goal of getting the plans/CAD finished to a point where i could have started the chassis construction by Easter 2020. That time frame has been and gone though thanks to Covid home schooling, working from home and a broken collar bone. My main reason for joining the forum was to get ideas about how to tackle some of the sheet metal pieces of the chassis. This I probably should have mentioned in the initial post but I forgot as I have just been discharged from the hospital after having a hook plate taken out of my collarbone. I am a little bit behind on the build diary as i had started to make an MDF template for the green part that forms the top of the dash structure. More to come on that when I can get back out to the shed and get some photos. PS I was recommended this forum by a gentle sole called Chris, maybe CJ, not sure what his username is. The forum wouldn't let me put that bit in during the registration process as it couldn't find a match for my random string of text. Cheers Ryan |
Welcome to the forum, Ryan. Always great to see a Ford project like yours. I'll be watching.
|
Welcome to the site. Cool project.
|
Ryan: welcome!
The GT40 sounds like a fun project. I'm scratch building a Lamborghini Miura and you might get some ideas from the build thread: http://www.allmetalshaping.com/showthread.php?t=18058 |
Hello Ryan! Some clever people on here who are very giving of their time.
|
Thanks for the warm welcomes.
I’m still looking around the site. I have 0 metal shaping experience, other than some sheet metal classes back in high school many years ago. Is there a thread that covers tools to get when starting? I have some roofing snips, drills grinders and other general fabrication tools but not a lot of stuff that is explicitly for sheet metal. I was planing on getting a box and pan brake as there are a lot of folded edges in the GT40 chassis. There are also a few other areas that will challenge me but I think I can get there. I’m guessing I probably need to get a bead roller and some dies, a shrinker/stretcher, some dimple dies for pressing holes. I have a hand held spot welded that will need some work to get it up to scratch. It needs some new electrodes. After that I am not entirely sure what else. Any directions on where to head for information or places to purchase other than Hare and Forbes in Oz? |
My free advice would be to contact Peter Tommasini http://handbuilt.net.au. He can provide outstanding guidance to start you on a very good path. Whatever the current Covid shutdown rules are in AU, Peter is where I would start.
Not many are so lucky as to have a Master like him in their backyard... |
Quote:
Definitely reach out to Peter who is local to you in Melbourne. His DVD's are very good, but you might end up as I did, talking like 'Con the Fruiterer' - Bewdifull! Please post progress on here - Kent White may also comment as he helped a chap make a lovely alloy GT 40. |
Thanks Cliff and Richard.
Richard, I have been following your BMW build on facebook for a while. i have sent an email to Peter Tommasini to see what he recommends. i would have been keen for one of the seminars but I think Covid will have put a stop to all that for the time being. I had been looking at these from Joels garage. https://www.joelsgaragegear.com.au/p...-brake-folder/ https://www.joelsgaragegear.com.au/p...d-roller-br18/ |
G'day Ryan, bloody good to see ya made it on here. Well done, like your intro too.
My "screen" name is Precocious Jeremiah. Actually it's the name of my scratch build Mk VII Coupe. Because it will be green and look like a bull frog front on . It is precocious as it is different. I have been in touch with Kerry re my Eckold type mechanical metal shaper MkII. MkI is a success ! But due to the toggle link between the walking beam and ram(quill) it makes a bit of noise. The shrinking dies also worked...for 2min. The double sided tape holding the emery tape to the die faces sheared off. No surprize there. But carbide stippling the die faces is an art I will have to aquire. The MkII version has done away with the toggle link. It is an experimental design which I have not seen used anywhere. Very simple AND I hope effective. We finally got the old lap top repaired and should be able to post some pics up the new design if proven. As the mob on here have been very generous with their input into improving the collective skills, I have decided to share my design as an open source, if it works ! Btw there is another Chris on here that you know well. I think he goes under the name of Boris. You may want to have a look at SATAUS. He built his own bike. He is another bloke you know, under a different name.... Cheers, CJ. |
Quote:
http://www.allmetalshaping.com/showthread.php?t=20032 I am sure I will work out who is who in here soon enough. |
Hi Ryan there was a person in australia who built a gt 40 a few years ago I cant remember if he posted it here or metal meet.He made pretty much The whole car and chassis . well worth a read if you an find it .
|
Welcome to the forum mate. Probably not that far from you.
Make sure you put a thread in the Automotive section on here and you will gain a lot going back over the old threads on there too. Cheers Marcus. |
Gt40
Look up ozi jim on here. He handbuilt a 40
|
Hi Ryan,
Welcome to the forum. Scott |
Thanks.
i have had a look at this thread. http://www.allmetalshaping.com/showthread.php?t=19313 still looking through the rest of the forum and learning a lot. any tips on threads that show the shaping of a floor pan? http://www.gelscoemotorsport.com/images/gallery/577.jpg |
Welcome Ryan,
I have bought stuff from Peter and Hare & Forbes and never had any problems with both. Admittedly I have bought stuff from Hare & Forbes knowing full well that I am going to modify or beef it up to suit my needs when I get it home. |
Welcome to the forum Ryan. I am very impressed with your Cad work.(Is it AutoCAD, SolidWorks, or?). Regardless, it very nicely done.
I too would offer the advice to contact Peter. If you have a chance to meet him, be sure to take a large jar of cucumbers, as it will serve you well in becoming a friend of his. If you are a cook of any kind, his favorite evening meal is a cucumber and possum casserole. |
All times are GMT -5. The time now is 12:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.