Prev
Yokes and clamping blocks for the top and bottom arms. The yoke will hold 3" diameter x 2" wide rolls. The yokes will be welded to the clamping bloc
Next
Prev
View showing the rolls, yoke and clamps on the upper and lower arms. The clamps allow the rolls to be positioned along the arms or on different lengt
Clamping block for top arm, welded at the bottom only. Top arm slides over a 1" steel rod and the OD of the tube is tight against the sides of the to
End view of top arm clamping block.
Yokes and clamping blocks for the top and bottom arms. The yoke will hold 3" diameter x 2" wide rolls. The yokes will be welded to the clamping bloc
Yokes in position and the clamping blocks. 1/2" pins in place with 1/4-20 button head screws and washers in place.
Clamping blocks on upper and lower arms.
Lower arm attaching block fitted in the lower base, They will be welded together. There is room for about 5" of adjustment in and out on the lower ar
Next
Joe Hartson

Yokes and clamping blocks for the top and bottom arms. The yoke will hold 3" diameter x 2" wide rolls. The yokes will be welded to the clamping bloc

Media information

Album
Portable e wheel
Added by
Joe Hartson
Date added
View count
12
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top