Prev
View showing the rolls, yoke and clamps on the upper and lower arms. The clamps allow the rolls to be positioned along the arms or on different lengt
Next
Prev
This shows the clamps welded in place on the handle end of the machine.
This shows the opening of the rolls when the quick release is moved to the open position. With the 32" arms the rolls open up about 2-1/2". Need a h
View showing the welds on the clamps. The top clamp is welded only on the bottom so that the clamp can tightly clamp on the upper arm. The lower arm
View showing the rolls, yoke and clamps on the upper and lower arms. The clamps allow the rolls to be positioned along the arms or on different lengt
Clamping block for top arm, welded at the bottom only. Top arm slides over a 1" steel rod and the OD of the tube is tight against the sides of the to
End view of top arm clamping block.
Yokes and clamping blocks for the top and bottom arms. The yoke will hold 3" diameter x 2" wide rolls. The yokes will be welded to the clamping bloc
Next
Joe Hartson

View showing the rolls, yoke and clamps on the upper and lower arms. The clamps allow the rolls to be positioned along the arms or on different lengt

Media information

Album
Portable e wheel
Added by
Joe Hartson
Date added
View count
13
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top