Prev
floorpans 047 Upper and lower dies for flat channel
Next
Prev
floorpans 044 This shows the tables, and the guidence system I used. The square tubing gets clamped under the panel, and rides against the rod welded
floorpans 052 Still needs a little metalwork around the front square bubble. Also needs to be sanded. This gives an idea the areas needing shrink to l
floorpans 046 Upper die to make the channel. I used the tubing in the picture to guide the dies and make straight passes. It worked as good on the upp
floorpans 047 Upper and lower dies for flat channel
floorpans 050 This is the die I made to run the bead around the battery opening in front pans. It is sitting on the plywood I used to guide.
floorpans 045
floorpans 048 Note the offset in the beading die. The stock bead had a tapper. The wood is the guide. I screwed it to underside of the panel, and the
Next
D

floorpans 047 Upper and lower dies for flat channel

  • Media owner Dyce
  • Date added

Media information

Album
36 Ford stuff
Added by
Dyce
Date added
View count
10
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top