Prev
floorpans 044 This shows the tables, and the guidence system I used. The square tubing gets clamped under the panel, and rides against the rod welded
Next
Prev
tools 002
tools 001
floorpans 092 This shows the hump in a stock floor.
floorpans 044 This shows the tables, and the guidence system I used. The square tubing gets clamped under the panel, and rides against the rod welded
floorpans 052 Still needs a little metalwork around the front square bubble. Also needs to be sanded. This gives an idea the areas needing shrink to l
floorpans 046 Upper die to make the channel. I used the tubing in the picture to guide the dies and make straight passes. It worked as good on the upp
floorpans 047 Upper and lower dies for flat channel
Next
D

floorpans 044 This shows the tables, and the guidence system I used. The square tubing gets clamped under the panel, and rides against the rod welded

  • Media owner Dyce
  • Date added

Media information

Album
36 Ford stuff
Added by
Dyce
Date added
View count
12
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top