Prev
Clamping blocks on upper and lower arms.
Next
Prev
End view of top arm clamping block.
Yokes and clamping blocks for the top and bottom arms. The yoke will hold 3" diameter x 2" wide rolls. The yokes will be welded to the clamping bloc
Yokes in position and the clamping blocks. 1/2" pins in place with 1/4-20 button head screws and washers in place.
Clamping blocks on upper and lower arms.
Lower arm attaching block fitted in the lower base, They will be welded together. There is room for about 5" of adjustment in and out on the lower ar
MVC 019S
Clamping block for the upper and lower arm that will have the yoke welded to it. It is 2" x 2" x 1-1/2" bored for the arms and split. There is an 1-
Next
Joe Hartson

Clamping blocks on upper and lower arms.

Media information

Album
Portable e wheel
Added by
Joe Hartson
Date added
View count
10
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top