a close up of the quick sketch I did, while planning the project. It shows 2 of the 3 racks, partially filled with tools.

a close up of the quick sketch I did, while planning the project. It shows 2 of the 3 racks, partially filled with tools.

  • Reaction score 0
  • Comments 0
overall sketch of the plan, including the compressed air pipe I plan to run from my compressor to this side of the garage.

overall sketch of the plan, including the compressed air pipe I plan to run from my compressor to this side of the garage.

  • Reaction score 0
  • Comments 0
The piece on the far right is "as cut," from the angle aluminum. The piece in the middle is finished with hand filing, which I was doing just to see

The piece on the far right is "as cut," from the angle aluminum. The piece in the middle is finished with hand filing, which I was doing just to see

  • Reaction score 0
  • Comments 0
Here is my little belt/disc sander in the middle. My tabletop drill press on the right. My bench grinder on the left. Now do you see why I need to

Here is my little belt/disc sander in the middle. My tabletop drill press on the right. My bench grinder on the left. Now do you see why I need to

  • Reaction score 0
  • Comments 0
Initial angle of cut for very small blade. I was trying out my new IR 4429 and only had 24- and 32-teeth blades. This stock is a little hefty for th

Initial angle of cut for very small blade. I was trying out my new IR 4429 and only had 24- and 32-teeth blades. This stock is a little hefty for th

  • Reaction score 0
  • Comments 0
Practice model pieces cut out and put in their approximate position. After looking at this on the model, I've decided to NOT use the inner corners, b

Practice model pieces cut out and put in their approximate position. After looking at this on the model, I've decided to NOT use the inner corners, b

  • Reaction score 0
  • Comments 0
Laying out the cuts for the side rails and the corner brackets. I really wanted to use square tubing for this part of the project, but found this hea

Laying out the cuts for the side rails and the corner brackets. I really wanted to use square tubing for this part of the project, but found this hea

  • Reaction score 0
  • Comments 0
machine_punk

Shop Wall Tool Rack Unit - Aluminum and Rivets

  • Items 7
  • Album owner machine_punk
  • Date created
Pictures from my shop wall tool rack project. The goal is to have a custom-made tool wall which can be reconfigured as my needs change or I get new tools. I am also using this to practice techniques I will use in future art and furniture projects.
Click to expand...

Album information

Album owner
machine_punk
Date created
Item count
7
View count
10
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

machine_punk

machine_punk

Media items
15
Albums
2
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top