And here it is being tested before finishing all the arms.

And here it is being tested before finishing all the arms.

  • Reaction score 0
  • Comments 0
And here it is being tested before finishing all the arms.

And here it is being tested before finishing all the arms.

  • Reaction score 0
  • Comments 0
And here it is being tested before finishing all the arms.

And here it is being tested before finishing all the arms.

  • Reaction score 0
  • Comments 0
This is difference after rounding and lightly polishing the plates, and painting all the other parts black.

This is difference after rounding and lightly polishing the plates, and painting all the other parts black.

  • Reaction score 0
  • Comments 0
This is difference after rounding and lightly polishing the plates, and painting all the other parts black.

This is difference after rounding and lightly polishing the plates, and painting all the other parts black.

  • Reaction score 0
  • Comments 0
This is what the plates look like after rounding, and then doing a light polish with 600 grit.

This is what the plates look like after rounding, and then doing a light polish with 600 grit.

  • Reaction score 0
  • Comments 0
I decided to weld on wings to use as 1/2" wingnuts, but I am not able to tighten them enough by hand to keep the arms from moving so by using allen he

I decided to weld on wings to use as 1/2" wingnuts, but I am not able to tighten them enough by hand to keep the arms from moving so by using allen he

  • Reaction score 0
  • Comments 0
Going to need 16 plates with 3/4" holes on the outside, and holes in the center with 1/2" hole on one side and other side tapped for half inch bolt.

Going to need 16 plates with 3/4" holes on the outside, and holes in the center with 1/2" hole on one side and other side tapped for half inch bolt.

  • Reaction score 0
  • Comments 0
6" sections of rod with ball bearings on each side, and 2" sections with ball bearings, washers, and threaded.

6" sections of rod with ball bearings on each side, and 2" sections with ball bearings, washers, and threaded.

  • Reaction score 0
  • Comments 0
6" sections of rod with ball bearings on each side, and 2" sections with ball bearings, washers, and threaded.

6" sections of rod with ball bearings on each side, and 2" sections with ball bearings, washers, and threaded.

  • Reaction score 0
  • Comments 0
Welded 2" sections of 1/2" solid rod to the ball bearings and then to the pliers.

Welded 2" sections of 1/2" solid rod to the ball bearings and then to the pliers.

  • Reaction score 0
  • Comments 0
1" Ball Bearings. God a pack from McMaster Carr for like $.50 a piece.

1" Ball Bearings. God a pack from McMaster Carr for like $.50 a piece.

  • Reaction score 0
  • Comments 0
Harbor Freight Grinder stand for the base.

Harbor Freight Grinder stand for the base.

  • Reaction score 0
  • Comments 0
Will need four. A set of four will run you about $80-100

Will need four. A set of four will run you about $80-100

  • Reaction score 0
  • Comments 0
These are the pliers that will be used, LockJaw brand. Self adjusting, you just set the tension and they do the rest of the work.

These are the pliers that will be used, LockJaw brand. Self adjusting, you just set the tension and they do the rest of the work.

  • Reaction score 0
  • Comments 0
S

Lazze Style Panel Holder

  • Items 15
  • Album owner ShawnMarsh
  • Date created
This is based on the panel holder that Lazze created and describes in his YouTube video.
Click to expand...

Album information

Album owner
ShawnMarsh
Date created
Item count
15
View count
13
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

S

ShawnMarsh

Media items
83
Albums
6
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top