the lower dies mount with a 1/2" round stem

the lower dies mount with a 1/2" round stem

  • Media owner HEATNBEAT
  • Date added Jan 11, 2012
  • Reaction score 0
  • Comments 0
lower adjustable die holder is just a 1-1/4" bolt the head cut off and a set screw mounted on the side

lower adjustable die holder is just a 1-1/4" bolt the head cut off and a set screw mounted on the side

  • Media owner HEATNBEAT
  • Date added Jan 11, 2012
  • Reaction score 0
  • Comments 0
adjustable upper stroke

adjustable upper stroke

  • Media owner HEATNBEAT
  • Date added Jan 11, 2012
  • Reaction score 0
  • Comments 0
1 hp3 phase motor with 110volt VFD. it runs about 400 RPM's any faster and it want to walk across the floor

1 hp3 phase motor with 110volt VFD. it runs about 400 RPM's any faster and it want to walk across the floor

  • Media owner HEATNBEAT
  • Date added Jan 11, 2012
  • Reaction score 0
  • Comments 0
side view with pedal mounted on side for transport

side view with pedal mounted on side for transport

  • Media owner HEATNBEAT
  • Date added Jan 11, 2012
  • Reaction score 0
  • Comments 0
momentary ON/OFF foot pedal

momentary ON/OFF foot pedal

  • Media owner HEATNBEAT
  • Date added Feb 10, 2011
  • Reaction score 0
  • Comments 0
delrin dished bottom with one of many UHMW upper

delrin dished bottom with one of many UHMW upper

  • Media owner HEATNBEAT
  • Date added Feb 10, 2011
  • Reaction score 0
  • Comments 0
the sand bag just sits in the holder

the sand bag just sits in the holder

  • Media owner HEATNBEAT
  • Date added Feb 10, 2011
  • Reaction score 0
  • Comments 0
6" dia sand bag

6" dia sand bag

  • Media owner HEATNBEAT
  • Date added Feb 10, 2011
  • Reaction score 0
  • Comments 0
this is a urathane bumper I think it is 90 shore

this is a urathane bumper I think it is 90 shore

  • Media owner HEATNBEAT
  • Date added Feb 10, 2011
  • Reaction score 0
  • Comments 0
Bammbamm spring adjuster1 with bronze nut this allows me to adjust the spring tension from outside the cylinder

Bammbamm spring adjuster1 with bronze nut this allows me to adjust the spring tension from outside the cylinder

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
boring the cylinder

boring the cylinder

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
UHMW upper die and a cuped Delrin bottom

UHMW upper die and a cuped Delrin bottom

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
made this bowl in about 2 min.

made this bowl in about 2 min.

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
cylinder with upper and lower brass bushings. a slot machined in the cylinder with a machined shoulder bolt to keep the ram inside from rotating I als

cylinder with upper and lower brass bushings. a slot machined in the cylinder with a machined shoulder bolt to keep the ram inside from rotating I als

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
first try with a 4140 HT die and rubber bottom

first try with a 4140 HT die and rubber bottom

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
machined parts

machined parts

  • Media owner HEATNBEAT
  • Date added May 23, 2009
  • Reaction score 0
  • Comments 0
HEATNBEAT

Bammbamm 15LB Hammer

  • Items 17
  • Album owner HEATNBEAT
  • Date created
the concept was designed by Ben Van Berlo I change it to fit my material and tooling I had.
Click to expand...

Album information

Album owner
HEATNBEAT
Date created
Item count
17
View count
10
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

HEATNBEAT

HEATNBEAT

Media items
283
Albums
21
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top