here is just another picture of the upper gear, adjuster, and collar. There is about .005 clearance when everything is mounted on the shaft. This is s

here is just another picture of the upper gear, adjuster, and collar. There is about .005 clearance when everything is mounted on the shaft. This is s

  • Media owner HEATNBEAT
  • Date added May 22, 2013
  • Reaction score 0
  • Comments 0
when I tighten the handles it locks the adjuster to the side of the beadroller, so it can't move but the shafts spins inside

when I tighten the handles it locks the adjuster to the side of the beadroller, so it can't move but the shafts spins inside

  • Media owner HEATNBEAT
  • Date added May 22, 2013
  • Reaction score 0
  • Comments 0
the gear is mounted on the shaft with 2 set screws. then the adjuster is installed then a shaft coller is attached to the shaft with 2 set screws. thi

the gear is mounted on the shaft with 2 set screws. then the adjuster is installed then a shaft coller is attached to the shaft with 2 set screws. thi

  • Media owner HEATNBEAT
  • Date added May 22, 2013
  • Reaction score 0
  • Comments 0
here is a picture showing how the complete upper shaft is installed. "A" is the upper shaft 7/8"CRS "C" the collar infront is 5/8" long. that is 1/2 t

here is a picture showing how the complete upper shaft is installed. "A" is the upper shaft 7/8"CRS "C" the collar infront is 5/8" long. that is 1/2 t

  • Media owner HEATNBEAT
  • Date added May 22, 2013
  • Reaction score 0
  • Comments 0
made a stand and mounted the motor

made a stand and mounted the motor

  • Media owner HEATNBEAT
  • Date added Dec 13, 2012
  • Reaction score 0
  • Comments 0
add a 1/4HP 3 phase gear motor. I will mount a sprocket and connect to the lower shaft.

add a 1/4HP 3 phase gear motor. I will mount a sprocket and connect to the lower shaft.

  • Media owner HEATNBEAT
  • Date added Dec 13, 2012
  • Reaction score 0
  • Comments 0
The upper shaft all the way in. The shaft collar flush with the front of body.

The upper shaft all the way in. The shaft collar flush with the front of body.

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
Upper shaft all the way out. 1-1/4" adjustment

Upper shaft all the way out. 1-1/4" adjustment

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
Upper and lower shaft even

Upper and lower shaft even

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
This is a picture of the adjuster all the way back

This is a picture of the adjuster all the way back

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
A picture of the adjuster all the forward(out)

A picture of the adjuster all the forward(out)

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
The upper shaft in the center position. The upper shaft lock. This keeps the upper shaft from moving in/out when tight!

The upper shaft in the center position. The upper shaft lock. This keeps the upper shaft from moving in/out when tight!

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
Just to show how the adjuster works. When tight it grips the side of the frame. There is another one on the other side.

Just to show how the adjuster works. When tight it grips the side of the frame. There is another one on the other side.

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
Just another picture to show how the upper shaft is locked into position. When tightened the shoulder is against the side frame the bolt does not touc

Just another picture to show how the upper shaft is locked into position. When tightened the shoulder is against the side frame the bolt does not touc

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
The upper u joint is pinned and welded to the upper shaft

The upper u joint is pinned and welded to the upper shaft

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
The shaft all the way out.the right side of the upper gear in the center of the lower drive gear.

The shaft all the way out.the right side of the upper gear in the center of the lower drive gear.

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
The upper shaft all the way in.the upper gear's edge is centered on the lower gear. The collar touching the side of upper shaft mounting block.

The upper shaft all the way in.the upper gear's edge is centered on the lower gear. The collar touching the side of upper shaft mounting block.

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 0
The lower shaft does not move in or out it is held in by a collar at the front and one at the rear. I also add a shaft support at the rear of the cut

The lower shaft does not move in or out it is held in by a collar at the front and one at the rear. I also add a shaft support at the rear of the cut

  • Media owner HEATNBEAT
  • Date added Aug 4, 2012
  • Reaction score 0
  • Comments 2
HEATNBEAT

ajustable bead roller

  • Items 18
  • Album owner HEATNBEAT
  • Date created

Album information

Album owner
HEATNBEAT
Date created
Item count
18
View count
11
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

HEATNBEAT

HEATNBEAT

Media items
283
Albums
21
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top