#1
|
||||
|
||||
Metalshaping in the North Woods 2018
I will be hosting the North Woods Metalshaping meet again this year on October 4th, 5th and 6th at my shop in Cumberland, WI. Similar to past years, the focus will be on making and repairing panels primarily using hand tools.
We probably have space for around 25 people in total. If you'd like to attend, please respond to this post, or send me a PM. Let me know what days and if you are bringing a larger project. Here is a link that shows photos from last year http://www.allmetalshaping.com/showthread.php?t=16900 ------------------------------------------------------------------ I believe Pat Brubaker will be here offering a class or two prior to the meet. Details on that should be available soon.
__________________
Steve Greenway |
#2
|
|||
|
|||
North woods 2018
Count me in. Hopefully for more than just one day this year.
__________________
Bill Funk |
#3
|
|||
|
|||
I'm planning to be there again this year.....
__________________
Dane Ea. Angelo Metalworks |
#4
|
|||
|
|||
Count the Draxlers in for 3
__________________
John R. Draxler Pittsville, Wisconsin center of the state |
#5
|
||||
|
||||
Attendee List
I'll edit this post as time goes by and try to keep it current. Here is who I THINK is attending. Let me know if you see a discrepancy.
1. Pat Brubaker 2. Mike Clarahan (Motage) 3. Bill Funk 4. Dane West 5. Paul Nygren 6. Mick Vollmar 7. John Draxler Sr. 8. John Draxler Jr. 9. Jimi (Draxler group) 10. Drew Schumann 11. Dale LaRue 12. Jeff (Sandmanred) 13. Chris Fleming 14. Chris Cooper 15. Eric Hokensen 16. Brock Shimon (large project) 17. Pat (Dale's friend) The following are people that indicated that they hoped to attend, quite a while ago. If your name is here please confirm one way or the other. 18. Henry Votel 19. Shawn O'Harrow (trying to arrange schedule.) Plenty of room for more people, let me know if you are interested. I am about full for large projects, if you were hoping to bring something large, please let me know.
__________________
Steve Greenway Last edited by Steve_Greenway; 09-25-2018 at 02:13 PM. |
#6
|
||||
|
||||
Hotel in Cumberland
Some of you that attended in previous years stayed at the Cumberland Inn and Suites. It has been sold and is now the AmeriVu Inn and Suites - Cumberland The phone is unchanged at (715) 822-5655. At least online, the rates appear a bit lower than before.
__________________
Steve Greenway |
#7
|
|||
|
|||
Count me in!
I was looking for an event to come to this fall. Drew
__________________
Drew Schumann |
#8
|
||||
|
||||
Body Sweeps
Some of you probably remember I demonstrated how to make body sweeps using a method developed by Mike Rouse, at the meet in 2016. I can set the router table up for this again if there is an interest.
If anyone wants to make a custom sweep, or even make a small set of standard sweeps, everything will be setup for it, just bring some blanks to cut them from. I use 1/8" hardboard blanks (also called Masonite by some) You can use other materials if you prefer. Let me know if you are interested and we can work out the details.
__________________
Steve Greenway |
#9
|
||||
|
||||
I updated the attendee list in posting #5 above. Looks like we will have a good group this year. Most of the previous attendees will be back, and we've got several new faces as well.
__________________
Steve Greenway |
#10
|
||||
|
||||
Patman's Classes
Here is a link to the info on Pat's classes for this year.
http://www.allmetalshaping.com/showthread.php?t=18276
__________________
Steve Greenway |
Thread Tools | Search this Thread |
Display Modes | |
|
|