#1
|
|||
|
|||
My Reciprocating Machine
After our recent Metalshapers Gathering in Michigan I was asked if plans or parts might be available for my machine. I am considering making something available to the public but am wondering about how much interest there is.
My machine has a throat depth of 25 inches Throat height is 16 inches Fits in a 4 foot by 3 foot area. Uses 19mm (3/4) square shank tooling. Has a quick release upper tool lift mechanism. 1/8 inch stroke 800-1500 strokes/ min 1 hp motor. Adjustable lower tool holder ( Rod Doc style) Main frame made from 6"x12" 3/8 wall tubing. I am thinking about making the upper mechanism available fully assembled for around $1500 or a complete machine with all guides, holders, stand and shrinking dies for $3500. Chime in if you have any interest. Andy Geelhoed(guesswork) |
Thread Tools | Search this Thread |
Display Modes | |
|
|