#1
|
|||
|
|||
Great Lakes metal shaping'17
I'm attempting to have the Jaguar on the ground and in attendance.
Great Lakes Metalshapers 2017.pdf
__________________
Mike |
#2
|
|||
|
|||
Our meet is only 8 weeks away. We've decided to change the format somewhat by focusing less on project base and doing a little more demonstrating Obviously if someone wants to try their hand on a specific skill or get some 1on1 that will be ideal! Get registered because we're closing in on our max limit
__________________
Mike |
#3
|
|||
|
|||
Great Lakes Metalshapers 2017
We're getting closer to our End of Sept first of Oct meet.We have approx. 21 pre registers as of today with room for about 35 per day. You can go to www.daggertools.com home page to get flier and or sign up in advance. We've had a great time the last couple years and also a large percent of first timers which is great.
Craig |
#4
|
|||
|
|||
Getting close to GLMS 2017 Sept 30-Oct 1
About a week and half out to 3rd annual Great Lakes Metalshapers 2017 meet. Great time should be had by all in attendance. Focus on metal raising practices, Alum Oxy-Act welding, Fusion welding on steel, Tig & Mig practices with focus on using silicon bronze filler, clay molding concepts. Sign up online or register at the door Sat & Sun 9:00 to 5:00 and for those traveling overnight we have special hotel rate for those interested. Bring any project your working on.
|
#5
|
|||
|
|||
Enough materials
Craig or Mike do You have plenty of alum. for welding I can bring extra, what thickness ? What kind of rod. I would like to accomplish welding alum.
__________________
Gary |
#6
|
|||
|
|||
Gary, we should be all set with alum sheet coupons, filler rod an d fluxes. We will have both conventional torch and a Cobra style to work with.
Bring your shield/ goggles and gloves if you have your own.
__________________
Mike Last edited by Mike Motage; 09-27-2017 at 10:13 PM. Reason: Additional info |
#7
|
|||
|
|||
Sounds great see you guys sat.
__________________
Gary |
Thread Tools | Search this Thread |
Display Modes | |
|
|