#1
|
|||
|
|||
just joined from grayson, ga
i used to read rec.crafts.metalworking regularly years ago. i'm hoping this forum will be as enjoyable as that was back in the day. i just bought a 100+ year old monarch 12" lathe that i need to learn how to operate. other than that, i have mig, tig, and oxy-acetylene welding capabilities, and a stomp shear, english wheel, box and pan break, press break, planishing hammer, and bead blaster.
__________________
cliff |
#2
|
||||
|
||||
Hello Cliff and welcome to the forum.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer. Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver. |
#3
|
|||
|
|||
Hi Cliff welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
Thread Tools | Search this Thread |
Display Modes | |
|
|