|
#1
|
|||
|
|||
Filler type after metal work
Hi Group,
I have a fender that I have replaced the lower 90* edge at the back of the wheel arch with a new piece, after welding in the replacement and finishing it with a hammer and dolly it has a very slight texture to it that I think I need to use a filler on to get a completely smooth finish. I've read about feather light and other fillers in books, but since I'm new to this I thought this would be a good place to ask the question. What do you use or recommend. I look forward to any comments. TX Mr fixit Chris |
#2
|
|||
|
|||
Rage gold is what we use in our shop
__________________
Bryan |
#3
|
|||
|
|||
Rage gold is what we use in our shop. but any good filler will work go to your auto paint store they will get you what you need
__________________
Bryan |
#4
|
|||
|
|||
Perfect Bryan,
I will go to the shop that sold me the primer and primer surfacer. TX Mr fixit Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|