#1
|
|||
|
|||
enfield sports cars
my attempt at building a clubman
enfield sports cars chris
__________________
Chris |
#2
|
||||
|
||||
Cool car. I like the seats also. Any build pictures?
Frank
__________________
Frank de Kleuver |
#3
|
|||
|
|||
Very nice Chris I like the way you did the bonnet!
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#4
|
|||
|
|||
Chris, you did a very good job on this. As Peter says, "nice touch on the bonnet" and I like the Brooklands screens and the raydyot up on cowl.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#5
|
|||
|
|||
Nice job Chris, there are a few blokes on here into these sport cars. I think Peter Tomasini has built one as well.
You should be teaching us how to do it at the VIC MM in Sept. Cheers John
__________________
John EK Holden V8 |
#6
|
|||
|
|||
some updated photo of my clubman
chris
__________________
Chris |
#7
|
|||
|
|||
Can tell your an aussie... nice wheels ☺
Nice work she looks good!
__________________
Paul... or Harry |
#8
|
|||
|
|||
cut some vents in the bonnet then bent with a 6 inch shifter /file/emry/scocth brite
chris
__________________
Chris |
#9
|
||||
|
||||
Nice work Mr Goldsmith.
I may have asked before but cant remember is that bonnet one piece. How did you go about it if it is. In post one the buck in rear of shot is that for the guards. Jim By the way if you go into edit advanced, above the text box is a paper clip next to the smiley face, if you open it and click on all it will put your photos up. Wherever you have the cursor in the text thats where it will place the photo or photos.
__________________
Nothing is to hard its just how much time you want to give it. Last edited by ozi jim; 09-05-2015 at 05:43 AM. |
#10
|
|||
|
|||
yes Jim that is the buck for the rear guards and the front ones just cut a notch out of the 90x35 timbers and tap one side over then turn around
do the other most of the bucks i see here are a piece of art themselves mine is just a bit of shity chipboard the bonnet is all one piece just bent up in the bender at work not rolled just bent little bit at a time and the photos you no i am no good at computers will have to get better chris
__________________
Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|