Schelin Mini Jaguar Fender: Wow!

[longyard]

This is really a worthwhile video, even though it lasts 1 hr and 6 minutes. Many of us will be familiar with most of the techniques Wray uses to make the fender, but there are two sections that I think many will find helpful and enlightening. The first is near the beginning of the video where Wray shrinks the "hip" of the fender using only a shaped length of 2x4 and a mallet. I've always wondered how those "hips", common on 1950s sports cars, were made, and here you see it being done.
About half way through the video Wray has too much metal in the MIDDLE of the panel, and he gets rid of the excess through shrinking using only a mallet and tree stump... again, the middle of the panel.
This is my longest video since the Geoff Moss videos of last year, but you really get an understanding of the time and multitude of techniques it takes to create such a panel. I hope you find it as informative, and inspiring, as I have.

https://www.youtube.com/watch?v=xeXtezrmK3M&feature=youtube_gdata

[Dave Deyton]

Watched the video, wow! Lots of good information.
I'm curious how you know what needs stretching and shrinking from the flexible shape pattern?
I would love to learn how to do those things. Looks like it just takes practice.

Thanks for posting.

Dave

[longyard]

Originally Posted by Dave Deyton

Watched the video, wow! Lots of good information.
I'm curious how you know what needs stretching and shrinking from the flexible shape pattern?
I would love to learn how to do those things. Looks like it just takes practice.

Thanks for posting.

Dave

A FSP is a 3-D buck where, when it puffs up, shows you need stretching. When it is too tight, or won't fit, on your metal blank, shows you need shrinking. You can approximate this with simple paper patterns, but an FSP is remarkably precise.
Treat yourself to a 3 day class with Wray, and your metal skills will be greatly improved. Wray's classes last from 9 in the morning until midnight, and really give you time to hone your skills... as well as work on personal projects with Wray's input when needed.

[Dave Deyton]

Thanks for the information, I would like to take some of those classes in the future. I learn so much just playing with metal in the shop. I know classes would jump metal work into high gear.

Always looking for a metal meet closer to home.

Thanks,

Dave

[jhnarial]

I really enjoyed that.

When I first come to the metal shaping forums Wray had already left. I read all of his threads but a lot of the pictures were gone. Randy Ferguson who used all of Wrays principles was still pretty active at the time. I studied everything he posted and took what I learned and took it to the garage and practiced. I found how Wray and Randy approached panels intriguing for two reasons, they were both masters at what they did and the tools they used were all either cheap or could be built.

I use a lot of the same methods as was shown but picked up some tips while watching this video.

Lot of different approaches could have been took to complete this panel but as Joe Hartson always says" there are a lot of roads to Town"

Good stuff

[Jere]

Thanks for the link Bill. Good stuff going on in a short time.

Jere