All MetalShaping

Go Back   All MetalShaping > Metal Shaping Stuff For Sale > Business Classifieds
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-18-2018, 05:44 PM
RockHillWill's Avatar
RockHillWill RockHillWill is offline
Administrator
 
Join Date: Oct 2009
Location: Rock Hill, South Carolina
Posts: 2,727
Default The 6th shipment of Peter Tommasini Wheeling Machines is being scheduled for shipment

I have just received confirmation that the 6th shipment of Peter's wheeling machines is about to be shipped. I am awaiting confirmation regarding the actual shipping date, expected to be only about two weeks from now. As in the past these orders are accumulated in groups of six, with two having already been sold, leaving four available in this shipment.

Differing from past shipments is the fact that Peter has agreed to allow us to maintain them in stock here in South Carolina, minimizing the waiting time for some buyers. I have also been in contact with Fastenal, and they have updated their shipping to include a much wider area that includes all of the states East of the Mississippi and all but two or three of the Western states depending on the time of the year and their in-house shipping demands. Their very low shipping costs makes these wheeling machines available for less money than having to drive more than 2-3 hours to pick a wheeling machine up. The appropriate size of Peters machines makes them fit a standard shipping pallet further minimizing shipping costs.

An arrangement with Bill Trombley is going to result in a line of accessories for the use on Peter's wheeling machines. The cantilevered design of Peter's upper wheel coupled with the ability to adjust the upper wheel support shaft opens up a significant opportunity to make tipping and edge contours opportunities. Bill has already designed an option similar to Peters that allows for the installation of a planishing hammer, and I have seen a large assortment of accessories that Bill has made for his own use after discovering what he feels is the advantages of the cast wheeling machine. Development is under way, and prototypes are being built for a 6" x 6" lower anvil on the advice from Cass Nawrocki , and I am making some SolidWorks drawings to develop some standard 3" x 3" lower anvils (both full radius and flats) that will incorporate roller or needle bearings to extend the anvils useful life when being used on the higher strength materials in this more rigid environment, with special attention to the transitional radii, each idea based on trusted input and advice from Kent White.

I have recently gained access to the newest version of SolidWorks 18 and the updated version of Cosmos for use in FEA testing. It is my intent to acquire Peters 3D development model of his cast machine and make numerous 3D model drawings of various designs of fabricated machines in an attempt to actually put some numbers to my curiosity regarding the effects that grain structure has on parallel cross sections of rectangular tubing, and the possible effect that it has on lozenging. As I look more and more into discussions regarding use of either type of wheeling machine, my attention has been zeroing in on how each designs maintains both vertical and horizontal alignment between the upper wheel and the anvil. I was surprised by how little of a horizontal movement can open the gap between the wheels. Misalignment of as little as .010" can lose approximately 25% of the pressure if using .040" material.

If there are those of you with any interest in acquiring a wheeling machine from Peter, PM me or look at this link to a page on my website for additional details. An update to the Fastenal shipping areas will be provided as soon as I can arrange it from Fastenal.

http://www.mantiquesresto.com/Restor...siniWheel.html
__________________
Will

Imagination is more important than knowledge - Albert Einstein

Click below for ordering or status info on Tommasini Ewheels:


http://www.mantiquesresto.com/RestoredItems/Tommasini/TommasiniWheel.html

Last edited by RockHillWill; 06-19-2018 at 08:16 AM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:32 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.