All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Basic questions and answers
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-21-2018, 12:33 PM
Jaroslav Jaroslav is offline
Member
 
Join Date: Dec 2012
Location: Czech Republic
Posts: 301
Default What type tool you have for bending 90 degrees ?

What type tool you have for bending 90 degrees 10 - 15mm bend height on the shape piece. Edge position for wire and the like. For pullmax or Eckold. I want to build an edge and do not want to use a bead roller.
Please give me advice, I do not want to invent it anymore.
__________________
Jaroslav
Reply With Quote
  #2  
Old 02-21-2018, 01:55 PM
longyard longyard is offline
MetalShaper of the Month September 2013
 
Join Date: May 2012
Location: Winston-Salem, NC
Posts: 1,037
Default

A picture or drawing might help us understand Jaroslav.
__________________
Bill Longyard
Winston-Salem, NC
Reply With Quote
  #3  
Old 02-21-2018, 03:11 PM
Jaroslav Jaroslav is offline
Member
 
Join Date: Dec 2012
Location: Czech Republic
Posts: 301
Default 90 degrres

Bill. I want to put the hem 90 degrees. In any shape - sheet cutout. I want a universal tool for Eckold or Pullmax or some home product.
I have a bead roller, but I want it another way.
I have a picture of the situation when I used a manual method for wire laying. I hope you used it in your book .....


http://allmetalshaping.com/showthread.php?t=16494
__________________
Jaroslav
Reply With Quote
  #4  
Old 02-24-2018, 12:32 PM
Jaroslav Jaroslav is offline
Member
 
Join Date: Dec 2012
Location: Czech Republic
Posts: 301
Default

DSC031561.jpgBill, I have this foto. Only for first step and degree 90.
__________________
Jaroslav

Last edited by route56wingnut; 02-24-2018 at 01:54 PM.
Reply With Quote
  #5  
Old 02-24-2018, 01:58 PM
route56wingnut route56wingnut is offline
Administrator
 
Join Date: Jun 2009
Location: dennison Mn.
Posts: 958
Default

Quote:
Originally Posted by Jaroslav View Post
Attachment 45673Bill, I have this foto. Only for first step and degree 90.
Pullmax makes a flange tool but is a dedicated flange height. With your machining skills you could do the corrections and have a few tools marked with the height you are looking for. Bill Longyard you should show a picture of what we discussed the other day
__________________
Dan Pate
Reply With Quote
  #6  
Old 02-25-2018, 02:29 AM
Jaroslav Jaroslav is offline
Member
 
Join Date: Dec 2012
Location: Czech Republic
Posts: 301
Default Kind of tool.

Okay, Dan, you can give a photo of that tool. I can produce, but I do not have the idea what kind. When I do not know, I'll ask. As far as I know, I give advise. Eckold has a stroke of 8mm. Thank you for your advice.
I have beautiful machines and a lot of equipment and this (THIS) I'm doing a mallet (MALLET) or hammer. I'm sad because I do not know how diferently way.
__________________
Jaroslav

Last edited by Jaroslav; 02-25-2018 at 03:57 AM.
Reply With Quote
  #7  
Old 02-25-2018, 05:50 AM
Ron Naida Ron Naida is online now
MetalShaper of the Month Nov 2015
 
Join Date: Feb 2010
Location: MD
Posts: 235
Default



I once thought about adding a second step to the Pullmax flange die to
make the wire pocket and then close it.
I never pursued it any further.

Ron
__________________
Ron
Reply With Quote
  #8  
Old 02-25-2018, 07:19 AM
Ken Hosford Ken Hosford is offline
Member
 
Join Date: Nov 2009
Location: South East Michigan
Posts: 351
Default

Ron you have me thinking wow
Reply With Quote
  #9  
Old 02-25-2018, 08:47 AM
hot rivet hot rivet is offline
Member
 
Join Date: Feb 2012
Location: Gloucester UK
Posts: 239
Default

Was it trumpf that used a toggle lever in their flange tool? i think that would work for any flange height with a suitable back guide. cant find a picture of it but the lower tool was basically a flat anvil and the upper reciprocating tool had a L shaped toggle lever, the long part of the "l" contacted and trapped the work whilst the short part turned the flange.
__________________
Paul
Reply With Quote
  #10  
Old 02-25-2018, 11:12 AM
hot rivet hot rivet is offline
Member
 
Join Date: Feb 2012
Location: Gloucester UK
Posts: 239
Default

http://www.smv.se/4daction/web_showp...01820/Flanging
__________________
Paul
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 02:54 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.