> Hello my names Jose from Austin Tx - All MetalShaping <
All MetalShaping

Go Back   All MetalShaping > GETTING STARTED > Introductions
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-17-2017, 01:40 AM
Jose Lopez Jose Lopez is offline
Member
 
Join Date: Jul 2017
Location: I live in good old austin TX but now own a shop in Lockhart TX
Posts: 1
Default Hello my names Jose from Austin Tx

Hello my names jose and go by el gato here in austin tx . Ive been working on hot rods and custom fabrications for about 5 years . Also do collaborations with a couple of friends who are metal shapers and fabricators . Ive been duing body and paint since i was 16 and in the mix learning all i can to improve any and every skill possible.

Im self employed since 2010 started a small one car bay shop duing only body and paint, took me a lil over 3 years to spread from my comfort zone and started duing more "table mixing" and my own touch on cars that i wanted to do somthing special for . As time went by i wanted to perfect my body work , attention to detail amplified for me and body lines and gaps were much more important to me so a couple of days in body work turned into weeks . I finally got the opportunity to invest in some tools and purchased a 150 SLT carry on miller tig welder and a Tweeko fabricator 141i mig welder . It took time before i can run a solid bead on both machines i practiced on replacement panels and patch panel work . After 2 years of dabbling in the unknown world of custom work i felt hooked to wanting to make everything my self ,but lacked the proper tools . Worked my ass off by overloading my self with work to be able to afford what i needed . Applied to a local hot rod shop that gave me the opportunity to showcase what i had to offer . Worked there for 2 years were i built some of my best work at the time . Got to meet folks who appreciated and complemented the work i had done. Traveled around the u.s. to shows like viva las vegas 18 , starbird car show and many more were a combination of work that the shop and my self had done was show cased . I have always been a loner and everything that i had learned had to be from scratch with out advice . So this was all new to me . Working on cars from 1930 -1960 was only a dream for me untill it turn into reality. I faced many challenges at the time , i had to make patch panels from scratch wich was hard . I had very little to non experience on the e-wheel ,shriker stretcher, and planishin hammer . Good thing was that the shop i worked for had just acquired a "shop line" of equipment from Beighley industrial , had the opportunity to spend time and learn basics and enough to make small replacement panels . That was the first of my problems , then came the welding i had never welded anything lighter than 1/8 so there i was applying too much heat to my panels and trashing them . With alot of trial and error i finally got it down. The more i dug into the craft the more i wanted to be involved in it . Moved back to my garage and this time i was able to afford the tools i needed to do it all at home .plans changed quickly and since then i had to opened up a shop to keep food on the table this time applying the new skills learned. Its been 5 years now and i cant complain ive been exposed to some great work and ive learned alot from friends ive made along the way . Im now rent free and for the first time own what i consider a small piece of heaven were i hope to make anything and everything that may come my way . I still have lots to learn and lots to ask . I stumbled upon this web site by pure accident and im glad i did . Why would i like to become a member ? I belong here amongst a groop of folks whos passion goes beyond the eye , were craftmentship drives the individuals who make this trade happen . Im Forshure this is not a hobby for me but a trade that im itching to learn more about from folks who day to day keep this art form alive.
__________________
Jose Lopez but go by El gato .

I want to be a part of a community that thrives in the same craftsmanship that pushes me to want to learn and achive my next goal .
Reply With Quote
  #2  
Old 07-17-2017, 08:34 AM
Peter Tommasini Peter Tommasini is offline
MetalShaper of the Month May 2013, Dec 2013
 
Join Date: Apr 2011
Location: Melbourne,Victoria, Australia
Posts: 6,566
Default

Hi Jose welcome to the forum
Peter
__________________
P.Tommasini

Metalshaping tools and dvds
www.handbuilt.net.au

Metalshaping clip on youtube
http://www.youtube.com/watch?v=WEAh91hodPg

Making Monaro Quarter panel:
http://www.youtube.com/watch?v=KIpOhz0uGRM
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:46 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.