> This old rust bucket in Ann Arbor MI - All MetalShaping <
All MetalShaping

Go Back   All MetalShaping > GETTING STARTED > Introductions
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-14-2017, 09:50 AM
jpbrennan jpbrennan is offline
Member
 
Join Date: Jul 2017
Location: Ann Arbor MI
Posts: 1
Default This old rust bucket in Ann Arbor MI

Good morning,

My name is James and I think the easiest way is not quite hard enough. I purchase widely considered piles of junk/rust and spend years figuring out how to fix/repair/replace that which is not working. I understand I might have a diagnosed medical condition which I have no desire to get vaccinated for.

My current projects include; A 1965 International Scout 800 that I purchased for $100 (that is the correct number of zeros) and consequently is more rust than sheet metal. B 1950 Buick super 4 door that I paid $500 for. It is considerable more sheet metal than rust, but requires full restoration. It IS complete though. Well, the seats and interior are missing most of the fabric thanks to rodents, but.... C 1987 M1009 CUCV or better known as military Chevrolet Blazer. Still painted camouflage. I has less rust than the rest, but I have been giving it a lot of time and effort. I have rebuilt a AM General 6.5 diesel NA for it, but I still have a short list of metal to replace on it.

The list of non-vehicle projects include a canoe, various old furniture (my most recent furniture is a chair that took me 6 years to finish - It is an old wooden chair that folds up almost flat and it had a bent hinge. It was strange, the metal parts were RIVETED to the wood!?!? I had to find the correct rivets - which I was NOT actively looking for. I stumbled upon them in a hard ware store.) I have an old tube radio/record player from Sears (50's) that I want to get working, another old stereo that I am turning into a liquor cabinet (prohibition style, secret doors, hidden XXX).... an old oak desk...

Anyway, you can see I have a hobby.

I am here to figure out how to build a bead roller from scratch that can put a bead in 11g sheet metal. I KNOW.... thats asking a lot. So, no HF conversion is going to cut it. Im doing this so I can make the bed for my scout. The original metal is 11g. A company sells replacement panels for the scout 800, but they are only 18g. The bed has 7 (or 5) beads running front to back. I have also sen some with an IH symbol pressed into metal near the tailgate. I want to make this. If a roller won't cut it, I will switch to a press so I can stamp the channel in a few inches at a time. I am not above failing and trying a different way. My last resort in my brain is torch and hammer for hot forging... I just don't think that will turn out as pretty. Aside from that, I am about to embark on a large welding cart to hold my MIG, TIG, and oxy-acetylene torch (with room for future water cooler and hopefully plasma cutter). I have googling lots of images for home made carts and have a pretty good idea.

I also fix old tools (recent Delta wood/metal bandsaw, now old craftsman belt/disc sander)

This is a long introduction.

My list of projects will never end.

I also want to build my own sailboat.... and convert a bus into a camper.... my wife really loves me....
__________________
James - This old rust bucket
Reply With Quote
  #2  
Old 07-14-2017, 03:23 PM
Gareth Davies Gareth Davies is offline
Member
 
Join Date: Aug 2012
Location: Staffordshire, England
Posts: 421
Default

Hi James and welcome to the forum. I always like to hear about people who have lots of unfinished projects. If we thought we were going to finish them all there would be less fun in starting them
__________________
Gareth Davies
Reply With Quote
  #3  
Old 07-14-2017, 09:57 PM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 510
Default

Welcome to the forum, James!
__________________
Mike
Reply With Quote
  #4  
Old 07-14-2017, 10:18 PM
jdrax jdrax is offline
Member
 
Join Date: Dec 2011
Location: Pittsville, Wisconsin
Posts: 31
Default

Hi
I am in the same boat (ship) as you
The list is long and varied, love old machines
__________________
John R. Draxler
Pittsville, Wisconsin
center of the state
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:18 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.