|
#1
|
||||
|
||||
41 Chrysler New Yorker Coupe
I will start a new thread for my project car.
I'm building a 1941 Chrysler New Yorker 2 door coupe. I'm installing 37 Ford headlights and shaping the front end similar to a Willys. I started by cutting off the headlight on the drivers side and brought the metal in to meet a template of the headlight. Coated it with bondo to create a buck to take a pattern from. Thanks for looking, Pugsy Last edited by 123pugsy; 08-31-2009 at 05:30 PM. |
#2
|
||||
|
||||
Mockup
I got both sides done with the outer pieces and then had to mock up one side to take patterns and to see if I liked the shape.
I made up another piece exactly as the outside pieces and tacked it in place. A little bit of "Burt" buck with some chicken wire to hold it in place and I got the shape. A little bit of metal finishing..... And that's where I am now. Lots more to do , but I'm in no rush. Thanks for looking, Last edited by 123pugsy; 08-31-2009 at 07:47 PM. |
#3
|
||||
|
||||
Welding Panels
Well I tried welding the 2 panels together and did not bad.
I TIG weld by trade, so that is not an issue. Going about it the right way with the stretching of the welds to get the shape back and trying to metal finish smoothly is new to me. anyway....pics..... Marked with the pattern for trimming... Tacked together..... A few 1" welds.... Penetration on the back side. The peening marks from stretching the previous welds showing.... You can see the weld line. The filler rod is slightly different color... Still needs metal finished but I'll do it later... Thanks for looking, Last edited by 123pugsy; 08-31-2009 at 07:55 PM. Reason: foto fixing |
#4
|
||||
|
||||
NICE work Pugsy! Did you take some of those photos at Ken Burt's shop? It sure looks like his ewheel in the background of the second photo.
__________________
Kerry Pinkerton |
#5
|
||||
|
||||
Thanks for sharing your progress. Looking forward to more posts.
|
#6
|
||||
|
||||
Quote:
That's the wheel I built right after the first time I went to Ken's. Very similar to yours as that was basically the only one I saw before making it. |
#7
|
||||
|
||||
Nice job on the panel. Please post more pictures as the progress continues.
__________________
Joe Hartson There is more than one way to go to town and they are all correct. |
Thread Tools | Search this Thread |
Display Modes | |
|
|