#11
|
|||
|
|||
The box was planned to be only as long as the underside would be flat, which was to the front and rear edges of the respective wheel openings. Slightly narrower than modified body lines, I used easy dimensions. The box is 36"wide x20"tall. 0124131233.jpg
0419131736a.jpg At each end of the box I have full width rib laid out in the same manner as shorter ribs. These full ribs make these areas obviously inline and serve as datum for the all other ribs. Smaller boxes serve to take up space on the ends of main box. Everything is checked and verified square.
__________________
Mike Last edited by Mike Motage; 01-01-2015 at 07:57 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|