> Large quantity of modeling clay. - All MetalShaping <
All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Resources
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-25-2017, 10:18 PM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 480
Default Large quantity of modeling clay.

I've purchased the close out of a modeling company. I have 500lbs of clay. I will bring to meets if anybody is interested, PM me. $2 per pound, usually cost is $4-6 depending on qty ordered.
__________________
Mike
Reply With Quote
  #2  
Old 01-26-2017, 09:46 AM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 480
Default

This clay is reusable if you keep it off of the floor. I used some larger baker's trays under the area where I would scrape excess from my model. Just wad the scrapings together, rewarm to 115 degrees in a medium large toaster oven and apply as needed.

This best way is to get a relatively close shape with foam or other cheap material, then skin coat with the clay to get the exact shape you are after. Because you can add, remove and add till you like what you see the clay is ideal for developing/ creating a look.
__________________
Mike
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:30 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.