#1
|
|||
|
|||
Extruded Aluminum Source
Hi. I'm looking for a source to purchase extruded aluminum channel in the Southern Ontario area. I'm in Hamilton, but anywhere in the Toronto / Horseshoe area would be fine. My local suppliers (that I've checked) just have angle / square / flat...
I'm looking for channel with pronouced rounds on the edges and no sharp corners. Gunnel material for an aluminum boat. 1" x 2" I am also looking for an "H" beam type channel as well 1 1/2" x 1 1/2" I have an aluminum Feathercraft Vagabond, and I would like a Feathercraft Flyer. But... All that I have seen are junk, and I'm not interested in scrap, so... I think I'll give it a go and make one. Should be a fun project. If I can find some nice edge for the top gunnel, every thing else can be made. I have a friend that cast the bow handles and transom supports for my Vagabond, so I can get more from him. The rest is sheet aluminum and rivets. Don't really want to weld anything.
__________________
Ian Last edited by Ian 1960impala283; 12-19-2011 at 10:50 PM. |
#2
|
|||
|
|||
__________________
Ian Last edited by Ian 1960impala283; 12-19-2011 at 10:04 PM. |
#3
|
|||
|
|||
__________________
Ian |
Thread Tools | Search this Thread |
Display Modes | |
|
|