#11
|
|||
|
|||
__________________
Onorius |
#12
|
|||
|
|||
Great job Onorius, there is a lot of work there. Would be good to learn a bit more on how you welded the panels and what challenges that presented
__________________
Rick Jones |
#13
|
|||
|
|||
Weld
Quote:
Here is my way how its works for me. I bend the margins and tack weld with tig, and then I fusion weld with gas. No filler road used. Sorry for my english I hope you understand.
__________________
Onorius Last edited by Steve Hamilton; 08-24-2018 at 04:57 PM. |
#14
|
|||
|
|||
Very cool project, Onorius- great work. Thanks for posting.
__________________
AC Button II http://CarolinaSculptureStudio.com https://www.youtube.com/channel/UCzSYaYdis55gE-vqifzjA6A Carolina Sculpture Studio Channel |
#15
|
|||
|
|||
thanks a lot for the appreciative words, especially since I come from a real artist, in comparison I am a little joke.
__________________
Onorius |
#16
|
|||
|
|||
Looks like you learnt how to gas weld Ali pretty quickly. Well done
__________________
David Hamer |
#17
|
|||
|
|||
Great wireframe buck/hammerform. Not trivial work but well worth the effort.
__________________
David Hamer |
#18
|
|||
|
|||
Hi Onorius,
How wide are the margins? You seem to be melting the margins down to the bend in the metal so that the other side of the panel is also fused? I would appreciate your comments Thanks, Mike
__________________
Mike Whelan |
#19
|
|||
|
|||
Quote:
Hi Mike, the margins is 4mm bend an 90 degree and tack with tig. When you weld with gas then you have this penetration like you see on my photo. Yes you must practice lithle bit to figure out how much speed you need for a good penetration.
__________________
Onorius |
#20
|
|||
|
|||
Fixing some mistakes
Fixing some mistakes
__________________
Onorius |
Thread Tools | Search this Thread |
Display Modes | |
|
|