All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-05-2018, 09:36 PM
pplace's Avatar
pplace pplace is offline
MetalShaper of the Month March 2018, August 2021,November 2023
 
Join Date: Jan 2018
Location: Hector, MN
Posts: 294
Default 1958 Ramber American

This week I started on a brand new build in the shop.....a 1958 Rambler American! I'd say hands down, this is one of the best looking cars ever produced! Well, maybe not....but I hope to change that!!

For those that followed my '49 Mercury thread, you've already seen a preview of this project. I had also mentioned at the start of that thread, that I wanted to be up front so everyone was aware of the fact that it was known and planned that the '49 Mercury build would go on the backburner during the duration of this Rambler build.

The difference between this build thread and my previous build threads posted on this forum: This will be "live time" as I'm just getting started on it in the shop. However, with that said, the customer did bring me the Rambler over a year ago so I could do the initial measuring needed for the full custom chassis that he had build by a chassis fabricator. After the measurements and such were figured out, the car left the shop until our scheduled start date.....the first week of April 2018!

One interesting / challenging thing about this car and build is the fact that it is a uni-body. With what we have planned for chassis, stance, wheels, engine, etc. I will basically be gutting all of the floor, cowl, engine bay, etc. and re-building it to fit the new chassis and engine......it'll be big undertaking for sure.

This first grouping of photos is of the car as it came to me last year in preparation to measure for the custom chassis. The customer asked my opinion of what we could do to improve the looks of the car and make it "turn some heads" I've attached a factory ad that I started with and the initial concept I came up with. (I'll explain a bit more "rough" plans beneath the posted picture)

Name:  1.jpg
Views: 6018
Size:  76.3 KB

View from the left front

Name:  2.jpg
Views: 5699
Size:  76.6 KB

View from the left rear

Name:  3.jpg
Views: 5643
Size:  75.1 KB

View from the rear. These are pretty small cars. Length is one thing but they are so narrow!

Name:  4.jpg
Views: 5384
Size:  75.5 KB

View from right side

Name:  5.jpg
Views: 5385
Size:  76.7 KB

View from right front

Name:  6.jpg
Views: 5369
Size:  77.7 KB

View from front

Name:  7.jpg
Views: 5252
Size:  77.8 KB

View of the engine and engine bay.

Name:  8.jpg
Views: 5480
Size:  79.0 KB

A factory ad drawing that I based my initial concept off of.

Name:  9.jpg
Views: 5415
Size:  77.9 KB

A rough idea of where we are headed with this project.

The biggest visual change is the roof line. The rear half of the factory roof in all honesty is just plain goofy looking!! I've shortened the roof up, slid the rear glass forward and slightly laid it down. Removed the B-post and turned it into a hardtop.

The second big visual change that needed attention was the rear wheel opening. Again....odd! It seems as if designer "A" designed the front wheel opening and designer "B" designed the rear wheel opening and they didn't compare notes until too late!ha I've changed the rear opening to mesh with the front, but dropped the opening a bit lower in order to help give the car a slightly more "slammed" stance by tucking the rear wheels deeper.

We have plans for custom bumpers, headlights, taillights, etc. but for the initial concept we just focused on the above items to get a good visual for our goals.
__________________
Rush too much trying to get to the end when the end is closer when you take your time.

Dane

Last edited by pplace; 04-05-2018 at 09:38 PM.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 11:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.