|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Classes before the Metal Shaping in the North Woods Event!!!
Hey guys I am excited to announce that I will be offering two classes at Steve Greenway's shop again this year! September 28th,29th & 30th, 1st the cost for each class is $350 so if you want to attend both that will be $700. Meals, refreshments and all materails are included in the cost of the class. The classes this year will still have a focus on hand tools but will be more project based this year. In years past we have done smaller pieces and focused a lot on more tips and tricks, this year we will be applying those methods to a project from start to finish. This means that we will do all the pattern and lay out work and figuring out the steps needed.
September 28th,29th we will be doing the pattern work and we will also be making any tooling needed for the project. Using the patterns we will lay out the panels and start the shaping using out patterns as a road map to get to where we are going. In my opinion the pattern work is the most over looked part of metal shaping and with the project I have planned it will be very clear that the patterns tell us what to do and where to do it. September 30th, October 1st We will finish shaping up the panels and start fitting them up and tacking them together. We will be using tig and a torch looking at the benefits of each and the differences between the two. With the parts welded together we will hammer the welds and metal finish the weld seam. We will de bunk some of the common "rules of thumb" with the welding, there is a big difference with how we want to weld these parts together vs a production type repair. I am excited, its going to be another good time! If you have any questions or would like to attend this class say so here, shoot me a email customridesbuiltmine@yahoo.com or just give me a call at the shop 1402-462-8581. Thanks everyone and have a great day! 20596990_1383722738348571_8582811730745095002_n.jpg 26904071_1534697319917778_1718471728679454517_n.jpg 29510993_982921795199314_1962780993207140352_n.jpg 33312883_1017407661750727_521019592164769792_n.jpg 14100435_656369474521216_8171908244382321324_n.jpg 17553889_776508412507321_4250325660957714024_n.jpg |
#2
|
|||
|
|||
Like to attend classes
Hi Pat, I Would like to attend these classes. I sent you an email as well. If you could confirm that I’m in (class not full already) I would appreciate it as I need to confirm my work schedule. Thank you.
__________________
Paul Nygren |
#3
|
|||
|
|||
Where bouts in the north woods is are these classes?
__________________
Phil |
#4
|
||||
|
||||
The classes are in my shop in Cumberland, WI. NW part of the state, about 90 minutes NE from Mpls/St. Paul metro area.
__________________
Steve Greenway |
#5
|
||||
|
||||
Steve beat me to it! Just a update there are 5 spots open for the class as of this evening so if you guys would like to attend let me know here or shoot me a email customridesbuiltmine@yahoo.com Thanks guys!!
|
Thread Tools | Search this Thread |
Display Modes | |
|
|