#14
|
|||
|
|||
I didn't get near as much done as I had hoped today. I started working on the drivers side outer cowl fit-up. I needed to get this taken care of so i can finish the drain channel cover. It is pretty close but I need to get it snuggled up along the bottom of the firewall a bit more. I am having to tweak the original metal and the new tin along the top seam. I will be raising the original metal another 1/16th inch and lowering the new piece 1/16th to bring the whole cowl piece up about an 1/8th.
I also got a lot done on the other side but still have some work to do in prepping for the spot welding. I was out there most of the morning, took a break for some lunch and ended up going with the wife to get groceries. Her folks are under 24/7 home care and my wife is the only one out of six siblings that can get the groceries... Anyway it's easier with the two of us so I went with her to do that. Here are some pics of the progress. Mostly fit up. The silver dots are where the plug weld holes will be punched. Mark
__________________
Name: Mark What I am building: BadAst. A Pro Touring style 1988 Astro with a full custom chassis, 509 BBC, TH400 w/ a gear vendors and a 9" w/ 3.75's. Last edited by astroracer; 12-04-2019 at 09:49 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|