#1
|
|||
|
|||
Lalit from India
Hi All,
This is Lalit from India. I am a mechanical engineer by education and tyre man by profession. I'm looking forward to make custom motorcycles and as it involves lot of metal shaping as well so I'm here. Best regards, Lalit |
#2
|
|||
|
|||
Namaskar, and welcome, Lalit.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#3
|
|||
|
|||
Hi Lalit welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#4
|
||||
|
||||
Hello Lalit and welcome.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer. Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver. |
Thread Tools | Search this Thread |
Display Modes | |
|
|