|
#1
|
|||
|
|||
Pullmax Various bits of literature
This lot might be of use to members
__________________
mike kleist |
#2
|
|||
|
|||
Some Pullmax P21 questions and information.
I am in the process of rebuilding my Pullmax P21 and I was wondering if any members out there could tell me what the correct endfloat of the variator input shaft should be. Mine is 8 thousands of an inch, with no radial play. Is this within a normal range? There is nothing in the manual for this.
pullmaxp21endfloat.jpg Pullmax P21 variator belt VX 37X10X1060 OPTIBELT - Variator belt is available from spareto.co.uk £24 but with a one month wait... Grease A suitable modern day grease for the Pullmax 21 is apparently Castrol Spheerol EPL-2.
__________________
mike kleist |
#3
|
|||
|
|||
Hi Mike
Lovely machine you have there. I suspect that that info will be hard to come by, but there is a firm in the US which has taken over the fabrication and distribution (license) of these machines. www.pull-xmachines.com/ They might be able to help with the specs you need. FWIW, 8 thou sounds nominal to me and don't think you need worry about this - especially as the radial play is sound. I have P21 manual in PDF if you would need it. You're welcome to PM me.
__________________
Manny Remember that the best of men, are only men at best. |
#4
|
|||
|
|||
Hello
Thank you for the reply. I will email the company and see if they will provide the information. Regards Mike Kleist
__________________
mike kleist |
Thread Tools | Search this Thread |
Display Modes | |
|
|