|
|
|
#1
01-09-2016, 05:08 PM
|
|||
|
|||
Hello from the Great White North!
Howdy everyone. My name is Jonathan and I am from Ontario, Canada. I am interested in hotrods and motorcycles. Just a few years ago I picked up a grinder for the first time, and also taught myself how to weld.
I have assorted projects. Currently I am working on a 1928 Model A Sport Coupe. I really have an interest in metal fabrication. Recently I discovered what an English Wheel and Bead Roller is. I have used neither, but would like to get started by building my own English wheel. I am here to learn from others and hopefully start on my journey to building panels for hotrods and bikes. I started watching Ron Covell videos and I am incredibly inspired. Cheers, Jon
__________________
Jonathan 
|
|
#2
01-09-2016, 07:58 PM
|
|||
|
|||
|
Hi Jonathan welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
01-10-2016, 02:33 PM
|
||||
|
||||
|
Hello Jonathan and welcome to the site.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#5
01-10-2016, 07:46 PM
|
||||
|
||||
|
Hello from the Great White North!
Welcome Jonathan from a fellow Ontarian.
This is a great site, lots of helpful people.
__________________
John S. E _________________________________________________ Torque is nothing, unless you can get it to the road.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
