#1
|
|||
|
|||
Firewall hole near rib
Wondering how I should go about this one small area. It's really thin and nettle. Patch piece would be ok, but it's real close to the corner raised rib. How could I grind metal that close to corner?
__________________
Jason A. Haynes |
#2
|
||||
|
||||
your new patch could include the bead, or you could get a small grinding wheel or grinder that handles small wheels like this one
http://www.ebay.com/itm/CP-7500-2-Ai..._Tools&vxp=mtr its one of my favourites for small places
__________________
Results = (Effort X Determination2) + Time |
#3
|
|||
|
|||
Quote:
Problem is I've never bead rolled anything. I do like that little grinder though
__________________
Jason A. Haynes |
#4
|
||||
|
||||
you dont need a bead roller, all you need is some wood, a few clamps and some time.
Do a search on this site on Hammerforming, and you will get what I mean.
__________________
Results = (Effort X Determination2) + Time |
#5
|
|||
|
|||
I agree with Marty, hammerform the whole corner and the grind area will be no prblem.
__________________
Mike |
#6
|
||||
|
||||
make the patch and weld it from the back! if its only on the flat part just cut it very precise. less grinding in the concave like that!
__________________
Brent Click |
#7
|
|||
|
|||
I used the 2" cutoff wheel. Worked great!! Thx guys
__________________
Jason A. Haynes |
Thread Tools | Search this Thread |
Display Modes | |
|
|