#1
|
|||
|
|||
Hello from UK
Hi all, Matt here from the UK, I have restored a few classic cars over the years and done plenty of lurking on the site a while back.
Latest projects are a Plymouth PA and a MkVI Bentley, both need "real" metalwork! Love seeing everyone's cool tool's and shops (sometimes think the projects come second to the tools) not a computer guy at all so this has taken ages.
__________________
Matt |
#2
|
|||
|
|||
Welcome aboard, Matt.
|
#3
|
|||
|
|||
Hi Matt,
Good luck with the MkVI Bentley. I struggled with the metalwork on a 1947 basket case in the mid seventies.I nearly went broke with the experience. Right now I'm working on the body of a 1953 Silver Dawn standard steel saloon. You probably know it has a similar body as the Bentley R Type and a close relative of the Mk6. Almost every panel had to be replicated or repaired. A never ending horror story. At present I nearing the completion of the roof. Mike
__________________
Mike Whelan |
#4
|
|||
|
|||
Welcome to the forum, Matt.
__________________
AC Button II http://CarolinaSculptureStudio.com https://www.youtube.com/channel/UCzSYaYdis55gE-vqifzjA6A Carolina Sculpture Studio Channel |
#5
|
|||
|
|||
Quote:
Good luck with the Silver Dawn, same rust problems but you get a larger boot/trunk area. Matt
__________________
Matt |
|
|