#1
|
|||
|
|||
Facel Vega Buck Again: But in Detail
Photos of this buck at AUTOWORLD in Brussels have been posted before, by me, and one or two others. However, the buck is now on the other side of the museum and is easier to photograph. When I visited last week, I tried to do a more detailed examination of it to better understand it. Here is what I found.
IMG_9202.jpg Original Facel Vegas buck with different style nose buck lying flat on the right of photo. IMG_9204.jpg Toggle clamps to hold strapping down on panel as deails such as wheel arches are hammered in. Wheel arch lip is steel strap, @ 1/4" or 6mm thick. IMG_9206.jpg Close-up of headlight pod. Aluminum panel is clamped to it. See later photo showing a custom fit clamp. IMG_9208.jpg Door jambs are steel. I couldn't determine if they were cast, or built-up from sheet. I believe they are built-up. IMG_9213.jpg On optional front end, one of the head lamp pod clamps. IMG_9216.jpg Gas filler door detail. Would be caulked/corked in. NOTE THE STEEL SPINE running along the fender ridge. IMG_9217.jpg Indentation for convertible top. IMG_9221.jpg Close-up of steel fender ridge spine. Panel clamp would have been covered in padded cloth. IMG_9225.jpg Close-up of fabricated panel clamp. IMG_9226.JPG
__________________
Bill Longyard Winston-Salem, NC |
Thread Tools | Search this Thread |
Display Modes | |
|
|