#11
|
|||
|
|||
Nice work on that sunbeam tank....
__________________
Jim O'Connor |
#12
|
|||
|
|||
Success!
What a brilliant community of talented people!
Having read through so many threads I decided to finally have a go at my first bit of sheet metal work and make the first attempt on the tool box for the Raleigh. It is a simple shape with a welded in back panel but the main issue I saw was the folded edge and how it would affect the sheet as I bent it to form the shape of the toolbox. All made with hand tools as that is all I have. The result with no filler and a light acid etch prime coat. I'm delighted! I hope the picture attaches. IMG_0023.jpg This give me great confidence and today I sourced a massive stump almost 3' high and 2' wide. I'll start a separate thread looking for advice on that. Thanks all so far. I wouldn't have had known where to start till I found this forum.
__________________
Jim O'Connor |
Thread Tools | Search this Thread |
Display Modes | |
|
|