> I'm ordering an Oxy Acetylene Outfit - All MetalShaping <
All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Welding Sheet Metal
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-08-2017, 09:05 AM
zekeymonkey zekeymonkey is offline
Member
 
Join Date: Oct 2015
Location: Ohio
Posts: 143
Default I'm ordering an Oxy Acetylene Outfit

I'm going to order an oxy acetylene kit in the next week or two for welding sheet metal, both aluminum and steel. How does this look and what am I missing?

Victor J-28 Torch handle
0-W-J Welding Nozzle
1-W-J Welding Nozzle
2-W-J Welding Nozzle
3-W-J Welding Nozzle
Smith Flash Back Arrestor - Regulator Mount
Smith 2 Stage Oxygen Regulator
Smith 2 Stage Acetylene Regulator
Welding face shield

I also need a set of hoses. I was thinking of hooking together a light weight hose set and a standard house set for added length. What would you recommend?

What am I missing?
__________________
Ezekiel
Reply With Quote
  #2  
Old 01-08-2017, 09:09 AM
rivetdriver rivetdriver is offline
Member
 
Join Date: Dec 2013
Location: Taylor,TX
Posts: 181
Default

You might want to look at what Kent has for sale.
Tinmantech.com ( I think)
__________________
Marcus Goetting
If it was easy -- they would do it at Walmart

www.mgcustomairframe.com
www.facebook.com/mgcustomairframe/
Reply With Quote
  #3  
Old 01-08-2017, 10:20 AM
Mike Rouse Mike Rouse is offline
Member
 
Join Date: May 2009
Location: Baton Rouge
Posts: 277
Default

You will find a "gas saver" to be quite useful. In proper welding it is about the torch setting. You set the torch and the gas saver turns both gasses off at the same time. You don't have to reset just relight with the gas saver.
A stand will keep the gas saver next to the work saving time and aggravation

I have a picture of my gas saver set up in my album.
I use Kent's hose it is great.
Mike
Reply With Quote
  #4  
Old 01-08-2017, 12:11 PM
cliffrod cliffrod is offline
Member
 
Join Date: Dec 2014
Location: Spartanburg, SC
Posts: 808
Default

Gas savers are great. The electric/battery ground piezo strikers will save even more gas vs running a flame on your gas saver, that is also sometimes good for a quick burn if you're not paying attention.

I would also add my vote for Kent's small Meco torch and lightweight hoses. I haven't bought one yet, but have been told by two of the more esteemed legit experts here that is it the best torch they have ever used for sheet metal work. These items are on my must-have list.

I do have one of Kent's TM2000 aluminum gas welding lenses, 15+ yrs and still love it. It is the best. If you're going to gas weld aluminum, it is a necessity imho.

If you are not going to weld enough to warrant leasing large tanks, you might consider buying 40cf tanks or whatever is the largest tanks you can simply exchange in your area without inspection. Around here, anything larger than 40cf must be sent off for inspection before refill. Any tank that fails inspection is discarded with no reimbursement. Smaller tote along tanks aren't big enough. Having 3-4 40cf tanks lets me work for a while, usually can spend a full day welding if needed.

Having a basic torch kit with everything to cut & weld is a good starting point, really a must have for any shop. These other items will supplement that. I have an airco/concoa torch I love. I have a cheaper victor set that I don't, but that whole set came with a rosebud and was still less than the rosebud tip alone for my favorite torch. Buy a good torch, not just a cheap one. You'll enjoy using it much more and your welding will benefit. If you can weld well with a bad torch, a better torch is like magic....
__________________
AC Button II
http://CarolinaSculptureStudio.com
https://www.youtube.com/channel/UCzSYaYdis55gE-vqifzjA6A Carolina Sculpture Studio Channel
Reply With Quote
  #5  
Old 01-08-2017, 02:07 PM
zekeymonkey zekeymonkey is offline
Member
 
Join Date: Oct 2015
Location: Ohio
Posts: 143
Default

I really like the idea of the stand with the gas saver and piezo ignitor. I think I'll order gas saver, piezo ignitor, and hose set from Kent. I think I'm going to hold off on the aluminum welding supplies, but maybe I should just go ahead and spend the money.

With the gas saver, should I have a set of arrestors at the regulator and at the output of the gas saver?
__________________
Ezekiel

Last edited by zekeymonkey; 01-08-2017 at 02:10 PM.
Reply With Quote
  #6  
Old 01-08-2017, 03:06 PM
cliffrod cliffrod is offline
Member
 
Join Date: Dec 2014
Location: Spartanburg, SC
Posts: 808
Default

Ask Kent what you need. He won't steer you wrong. I only have one set of arrestors on my hoses, maybe not what is recommended but that's what I have. I don't have one of the piezio ground igniters yet. RockHilWill has them at his shop and they're great. With smaller tanks, everything you can do to conserve gas is a big plus.

My old Conocoa torch welds AL great, as well as steel. Using Kent's lens and flux helps you see AL bead much better. The MeCo is a step up that I'll afford at some point. If you have a good torch, it'll do a lot especially if you practice, practice, practice.... Nice thing about gas welding equipment is that it's easy to add to a basic rig so doesn't have to cost huge money to get started.

With a comfortable torch and well planned workspace, Gas welding is a happy place.

Don't forget the fire extinguisher.
__________________
AC Button II
http://CarolinaSculptureStudio.com
https://www.youtube.com/channel/UCzSYaYdis55gE-vqifzjA6A Carolina Sculpture Studio Channel
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:35 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.