#1
|
|||
|
|||
Introduction
Good Day, A quick introduction of myself. I have been a sculptor and art fabricator for the past 25 years. Been building as long as I can remember. The studio is spread across several different focus points An extensive manual machine shop developed over the years, slowly catching up to the CAD skills with a recent acquisition of a Mori Lathe. Finally finishing the contol rework of a beautiful 1971 Boko WF1 5 axis mill. Metal fabrication and welding always seems to be evolving to accomplish increasingly complicated fabrications. Looking for advice on mark-less fusion welding of thin gauge fabrications. Been using 17-7 extensively in a new kinetic sculpture. This material has a very high yield point so we can develop some very stiff light structures. down side is it work hardens rapidly. Always looking for wise insight. Thanks for your time, Stu
__________________
As always, Stu |
#2
|
|||
|
|||
Hi Stu welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
Thread Tools | Search this Thread |
Display Modes | |
|
|