All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Buck Building
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-14-2014, 08:52 AM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016, June 2020, April 2023
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 802
Default

The box was planned to be only as long as the underside would be flat, which was to the front and rear edges of the respective wheel openings. Slightly narrower than modified body lines, I used easy dimensions. The box is 36"wide x20"tall. 0124131233.jpg

0419131736a.jpg At each end of the box I have full width rib laid out in the same manner as shorter ribs. These full ribs make these areas obviously inline and serve as datum for the all other ribs. Smaller boxes serve to take up space on the ends of main box. Everything is checked and verified square.
__________________
Mike

Last edited by Mike Motage; 01-01-2015 at 07:57 PM.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.