#6
|
|||
|
|||
Also a pan update:
I finally received the last missing seat rail, so directly welded the small bracked to stop the seat on: And welded the driver's side rails Starting to look like a real pan: And one "happy driver", first time I was able to seat on MY ghia's seat ops: But there was still some work left. First cleaning the welds/putting the bottom in primer: And you surely noticed the missing jack points, so here we are: Everything with welding primer: Adjusted: Welded: And in primer: Pan is now ready, waiting for it's coat of fresh paint but before, I will "use" him in order to weld the heater channel properly. So here we are, with the heater channel waiting to be fixed on it before I lift it under the body ops: Stay tuned Antoine
__________________
Antoine Puygranier Resurrecting a 60 ghia: http://www.allmetalshaping.com/showthread.php?t=18852 Fixing a 914: https://allmetalshaping.com/showthread.php?t=20624 |
Thread Tools | Search this Thread |
Display Modes | |
|
|