All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 06-09-2018, 09:30 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is offline
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
 
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,131
Default

I removed the fuel vapor recovery canister from the CTS and installed it in the 49. It hangs on the sheet metal above the rear suspension assy. I needed to get it in there to check for clearance. Next I installed the rear suspension cradle again. It's pretty crowded in there but I can leave the parking brake actuator in its original location and the vapor canister clears the suspension by a couple inches.

Name:  1201.jpg
Views: 1522
Size:  50.9 KB

Next I started closing up the trunk floor around the suspension. I reduced the size of my pictures as requested by Adm. I think I'm in size. I just reduced the dimensions on my picture resizer

Name:  1202.jpg
Views: 1504
Size:  77.5 KB
__________________
Jack

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.

Last edited by Jack 1957; 06-09-2018 at 09:34 PM.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 10:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.