#1
|
|||
|
|||
Shaping a long part without a helper
Hi,
I have a steel sheet that is 24 inches by 60 inches and want to put a small amount of shape in it. I usually work alone with no helper and want to find a way to shape the part by myself. I wonder if any one has ever had this problem and how they solved it when wheeling or on a power hammer. After reading the posts on this site I see there are a lot smarter metal workers than me. Thanks for any input. Don |
#2
|
|||
|
|||
long panel
On metalshapers.com then tool then e-wheels Jim Baile had a roller system that he used. I think it is still in there. Fred26t
|
#3
|
|||
|
|||
Hi Fred26T.
Thanks for the tip on Jim Baile, I found a lot of information and ideas that will help. Don |
Thread Tools | Search this Thread |
Display Modes | |
|
|