All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #51  
Old 06-09-2017, 11:28 AM
CaptonZap CaptonZap is offline
Member
 
Join Date: Dec 2015
Location: Denver CO
Posts: 86
Default

I noticed that the exposed edging wire was rusted. Do you use any of the phosphoric acid conversion methods to treat the unexposed wire edging rust in situ? If so, do you have a favorite?

Thanks for showing us your methods.

CZ
__________________
Jerry Roy
Reply With Quote
  #52  
Old 06-11-2017, 11:26 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,707
Default

Jerry, thanks for the questions/comments. I try to use media blasting (I use 80Grit Garnet) over any conversion type coating, so yeah, that's my favorite.

We media blasted the wire and will flood the area after wrap/before painting with SPI epoxy primer..



tried to make some headway on the Biederman. John is taking it to the truck show in Macungie PA so we're trying to get the fenders complete so he can bolt them on and answer questions all day about their bare finish..

With the lower hood side cleco'ed to the passenger fender using wing nut clecos to pull things up nice and tight, lets get some plug welds done to join all three parts together...









Passenger fender lapped seams then had SPI epoxy brushed in from both sides to seal in case he runs into rain. We he returns they'll be ready for media blasting and paint..



Next onto the Driver fender, the remainder of the flange from the old filler panel is removed, a cut off wheel is used for releasing the OEM spot welds..









Next, we had a rub issue where the fender was a bit close to the cab....note the flat area, as well as a rust through. So we'll just trim this out and replace..





__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
  #53  
Old 06-11-2017, 11:34 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,707
Default

Today I finished up the TIG welding on the rust repair...





This area has a recess so it doesn't rub the side of the cab...



Next to clamp the front repair section, the vise grips tend to rotate after clamped and allow the weld joint to open. So to fix the gravity issue, we broke out the painters tape..









16 gauge sheet metal wiring, gotta love it!





Next time we'll get the filler panel added to the Driver's fender..

__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
  #54  
Old 06-12-2017, 10:36 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,707
Default

This evening's progress, the bolting flanges were cut out of 12 gauge steel, and tacked in place using the TIG. Then welded and dressed..














Next to trim the front of the fender, a laser is set up 13-3/4" above the table holding the fender. This is the differential we measured off the truck from the bumper filler panel down to the running board. all four corners on the table are checked to insure the laser is set correctly. Then the laser line is transposed to the fender and trimmed..











The height was adjusted by sliding the blocks forward/backward in the fender.





Front mounting flange TIG welded in place and welds dressed..





Filler panel fitted to the fender and plug welded...








Test fit onto the truck, aligned to the lower hood side and cleco'ed in place.











We'll get the lower hood side welded on tomorrow evening, holes drilled, and fenders bolted up to the truck.
__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
  #55  
Old 06-13-2017, 06:08 AM
Gojeep's Avatar
Gojeep Gojeep is offline
MetalShaper of the Month March 2015, March 2020,, June 2022,Aug 2023
 
Join Date: Nov 2013
Location: Eastern Melbourne, Australia
Posts: 2,986
Default

Truck so different just having that sitting in place. Much more finished.
__________________
Marcus
aka. Gojeep
Victoria, Australia
http://willyshotrod.com

Invention is a combination of brains and materials.
The more brains you use, the less materials you need.
Reply With Quote
  #56  
Old 06-13-2017, 09:38 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,707
Default

Tonight we got the lower hood side plug welded to the driver's fender, then the lapped seams were brushed with SPI epoxy primer from both sides to seal out the elements. John will be taking this to a couple shows with the fenders in bare metal, so we needed to seal those areas.



With the fenders all one piece again, we took them to John's shop for re-assembly. First order of business is to add some welting to the fender area adjacent to the cab's lower cowl area...



..then bolted up the fenders and battery tray.. This should give John a head start on the finishing touches tomorrow before loading it up for the Macungie Truck show.







__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
  #57  
Old 06-16-2017, 09:55 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,707
Default

John got the Biederman out into the sunshine Wednesday after a long hibernation, getting it ready to take to the truck show in Macungie PA.








Loaded up and ready to go....





Today's pictures from the show, the Biederman makes its debut. Still needs a bit more paint on the front end, but John said he's had a ton of interest in the truck and the bodywork Guess I should have sent him up with business cards.





__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
  #58  
Old 06-17-2017, 04:16 AM
neilb's Avatar
neilb neilb is offline
MetalShaper of the Month March 2019
 
Join Date: Aug 2013
Location: Melbourne OZ
Posts: 672
Default

really really nice job robert! but you don't need to hear that from me! lol
__________________
Neil
Reply With Quote
  #59  
Old 06-17-2017, 09:29 AM
bobadame bobadame is offline
MetalShaper of the Month Feb 2015
 
Join Date: May 2009
Location: Fort Collins, Colorado
Posts: 1,192
Default

Beautiful work there Brer Robert.
__________________
Bob

Don't believe everything you think.
Reply With Quote
  #60  
Old 06-17-2017, 09:32 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month Feb.-11, July - 2018, Sept. 2020
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,707
Default

Thanks guys!
__________________
Robert

Instagram @ mccartney_paint_and_custom

McCartney Paint and Custom YouTube channel
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 08:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.