#1
|
|||
|
|||
N10 handbuilt dvd
Hi every one
For some unknown reason some of my emails have been going straight to my Junk box and of course I have been deleting them with out reading them After finding this out I have now fixed the problem. If any body out there has sent me an email about them, or to purchase them, and has not got a reply, please do so again. I should be able now to give any info on them Thank you. NTSC and PAL format available Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM Last edited by Peter Tommasini; 07-16-2016 at 06:50 AM. |
#2
|
|||
|
|||
Of course, I am interested in one.
__________________
Will |
#3
|
|||
|
|||
What is in the number 10# dvd Peter? thanks
__________________
Mark |
#4
|
|||
|
|||
Hi Mark
dvd N 10 covers shrinking with an oxy torch, on and off dolly work, repairing damage panels with little or zero excess planishing and metal finishing and a few other tips Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#5
|
|||
|
|||
how much is it? Does gulley carry this one? thanks
__________________
Mark |
#6
|
|||
|
|||
Hi Mark....
Gulley does not carry N 10 yet but probably soon. The dvd N 10 is $52 AU including shipping Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM Last edited by Peter Tommasini; 07-17-2016 at 06:22 PM. |
#7
|
|||
|
|||
do you have paypal account I can make a payment to? thanks
__________________
Mark |
#8
|
|||
|
|||
What does this dvd cover Peter?
__________________
Scott in Montreal |
#9
|
|||
|
|||
Hi Scott check my post above
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#10
|
|||
|
|||
__________________
Scott in Montreal |
Thread Tools | Search this Thread |
Display Modes | |
|
|