#1
|
||||
|
||||
20% Off till the 31st of May
We're moved and settled in. Now for the Next few days 20% off everything!
We've got some extra product and want to move it along, If you've been waiting on a Good deal here it is! On Most Lower Anvil Sets thats almost enough to pay for the Hardened Option. Our turn Around Time is usually less than 2 weeks even if we have to make it from scratch. Thanks for the Support All Metalshaping.
__________________
Joe Andrews Hoosier Profiles Inc 213 N 1st St Decatur IN, 46733 Phone 260-301-9034 Fax 260-724-2236 |
#2
|
|||
|
|||
In the event you may have missed one of my earlier posts regarding the use of the rubber tire on my english wheel, I would like to offer this note.
In the midst of all that is going on with Joe at Hoosier Profiles, I sent him a set of old 'flat' lower anvils and asked him to make full radius rollers out of them. Some of them were poorly made and had inferior bearings in them. Joe took the time to make them into a full set of VERY nice polished full radius lower anvils with new bearings and supplied me with a new 3/4" ID 3" OD upper wheel to use with his 'lifter' assembly, all at a VERY reasonable price and the turnaround time was under two weeks. I recommend using this gentlemans service's whenever possible.
__________________
Will |
Thread Tools | Search this Thread |
Display Modes | |
|
|