All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Software for Metalshaping
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-04-2015, 03:14 PM
Leepac1 Leepac1 is offline
Member
 
Join Date: Dec 2014
Location: Durham U.K.
Posts: 33
Default Advice

Hi,
I am currently in the process of rebuilding a 1932 Alvis 12/50 TJ, starting with an abandoned rolling chassis. I will be finishing the chassis work shortly and then I have the daunting task of building a new body from scratch.
What I should like to ask the members is,(taking into consideration that I am quite poor with computers) is there such an idiot proof programme that will allow me to take and rework a photograph to redesign a body shape by altering it, eventually coming up with a shape that suits me and also be able to take measurements from.
I know that I might be asking a lot but I am not capable of driving a full blown CAD programme and I figured that this might be a better option than making and scrapping dozens of full size templates until I got something that I liked, any help would be greatly appreciated and thank you all in advance,
Andrew.
__________________
Andrew.
Reply With Quote
  #2  
Old 09-04-2015, 07:57 PM
Ranchero50 Ranchero50 is offline
Member
 
Join Date: Jun 2015
Location: Hagerstown MD
Posts: 71
Thumbs up

Hey Andrew, I'm a firm believer that CAD should stand for Cardboard Aided Design.

I don't say that flippantly. You can flesh out and form some basic design elements quickly with minimal effort. Before making the fairing for my bike I did print out some pics of it and sketch some ideas of what I needed. When I built my jet boat I spent a lot of time sitting on a milk crate making motor noises which helped the ergonomics and deciding where to mount things. I'm good at visualizing what I want but still needed some stuff for my mind to work with.

You should be able to lock in your seats, cowl / firewall and radiator pretty quickly and flesh out the form from there. Good luck and post pics.
__________________
Jamie, the kid who took his toys apart...
Reply With Quote
  #3  
Old 09-05-2015, 08:38 AM
Leepac1 Leepac1 is offline
Member
 
Join Date: Dec 2014
Location: Durham U.K.
Posts: 33
Default Ranchero

Thanks very much for that, this is where I started..
image.jpg
__________________
Andrew.
Reply With Quote
  #4  
Old 09-05-2015, 08:40 AM
Leepac1 Leepac1 is offline
Member
 
Join Date: Dec 2014
Location: Durham U.K.
Posts: 33
Default

This is where I am now...
image.jpg
__________________
Andrew.
Reply With Quote
  #5  
Old 09-05-2015, 08:42 AM
Leepac1 Leepac1 is offline
Member
 
Join Date: Dec 2014
Location: Durham U.K.
Posts: 33
Default

Hopefully, to something like this, in the not too distant future...
image.jpg
__________________
Andrew.
Reply With Quote
  #6  
Old 09-05-2015, 09:04 AM
Kerry Pinkerton's Avatar
Kerry Pinkerton Kerry Pinkerton is offline
Administrator
 
Join Date: May 2009
Location: Near Huntsville, Alabama. Just south of the Tennessee line off I65
Posts: 8,321
Default

Andrew I feel you pain. I don't do CAD either. Years ago...Y E A R S... there were these things called opaque projectors. Basically you could lay a book or photograph on the surface, it would project it on a screen or all. The further away, the larger the image. I have one that is probably 40 years old.

If you could borrow one of these, you could literally cut and paste photos and sketches and project them onto a wall life size.

Once you get the profile you like, you could use this to project on a white paper wall and trace/measure the areas you want and create templates and even a buck of sorts.
__________________
Kerry Pinkerton
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.