All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Events
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-26-2016, 08:32 AM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 3,089
Default Redneck Roundup for 2017

This is a confirmation for the holding of the upcoming Redneck Roundup #4, being held on March 30th thru April 1st, 2017 in Rock Hill, S.C.We have a number of extremely talented folks that look like they are going to be in attendance and I am excited about that. My shop is rather small compared to Dan's and Kerry's, so I would ask that those of you that want to bring projects, bring a smaller one until I figure out how my shop spacing is going to adapt to the attendance. I have added some more tables, lights and a hot water heater. I DO encourage bringing a small project as there will be plenty of advice and material available.

My shop is a one-man shop, but I have a pretty good assortment of equipment, so at this point I am NOT requesting additional large machines to be brought. For yourselves, perhaps your two most used hammers and dollies, air tools, maybe an air hose. I would advise a pen and notebook as well. Your own portable work bench would help, and to bring your own chair(s) would be a REAL good idea.

I would expect that if you are going to either work or watch that you bring your own gloves, safety glasses, ear protection and welding helmets. I have a few extras, but not enough for everyone.

We will be having a tool exchange. To participate you need to HAND MAKE a small metal shaping related tool with a value of about $25 - $35 dollars. On Saturday afternoon those items will be put on display and a ticket provided to each of the participants and as their ticket is drawn from a hat they will be given a choice of what is on the table. I think this is a GREAT idea (not mine) and would encourage your participation.

We will also have a small swap meet area set aside in the event you might have a small tool or shaping item that you have for sale. The swap meet items should be light enough to be hand help and sit on a table .The folks in attendance either are, or will be your friends, so price accordingly.

I have some allergy issues, so the shop is a smoke free environment, but smoking outside will not be a problem. My wife hates cigarette butts on the ground, so I will have 'butt' cans strategically located.

Most of my shop is air conditioned and has an inside bathroom (recently added hot water for gas weld aluminum cleaning) Saturday lunch will be a catered barbecue meal, and I am optimistic that the best fried chicken you have ever had will be provided on Friday or Saturday.

We have received very generous offers donations for door prizes again this year. If you would care to contribute any door prizes contact me so that i might spread out how they are distributed. Last year some folks got some VERY nice items, for which I am most appreciative.

As I noted above, my shop is small and it has become apparent that it gets crowded quite quickly, so I have contacted those past attendees and set a 'limit' at about 40 folks, and that's pushing it a little bit. I have included the list of confirmed attendees and have room for perhaps 3-4 more. If you are on the list and determine that you cannot attend this year, please advise me so that I can make room for another. I apologize for this limit, but past experience has shown it to be necessary.

This year there will be number of wooden bucks from Jim Hery's Bugatti project that will be made available for use.

Jimmy Matthews
Jay Matthews

Steve Greenway
Mike Yurko

Bob Kolenda
Mallory Kolenda
Jim Hery

Dan Pate
Todd landon
Wick Hatch

Jake Ladd - (Memphis Rain)
David Gandy
Mike Motag
Ben Von Berlo
AC Clint Button
Cotton Eubanks
Scott White
Teddy Hefner
Andrew Slater
Jeff Newton

Robert Robinson
Tommy Tyson

Dale LaRue
Jere Peterson
David Bolden
Gary? Olson
Steve Hamilton
Jimmy Bunton
Pat Brubaker
George King

Dan Shady
Billy Jack
Bob Baisden
Stan Lobitz
John Tratnau
Eric Moore
Jim Russell
Tom Walker
Carry Culpepper
Joe and Peggy Andrews
__________________
Will

Last edited by RockHillWill; 12-26-2016 at 03:04 PM.
Reply With Quote
  #2  
Old 12-26-2016, 08:45 AM
Kerry Pinkerton's Avatar
Kerry Pinkerton Kerry Pinkerton is offline
Administrator
 
Join Date: May 2009
Location: Near Huntsville, Alabama. Just south of the Tennessee line off I65
Posts: 8,320
Default

Man, I hate that I cannot make it this year!
__________________
Kerry Pinkerton

Last edited by RockHillWill; 12-26-2016 at 08:47 AM.
Reply With Quote
  #3  
Old 12-26-2016, 08:49 AM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 3,089
Default

Kerry, I know I was a little late providing the date, and your previous commitment is understandable, but you will be sorely missed my friend!
__________________
Will
Reply With Quote
  #4  
Old 12-26-2016, 08:57 AM
tom walker tom walker is offline
Member
 
Join Date: Dec 2010
Location: st.louis,mo.
Posts: 134
Default Redneck round up

If there is still room, I'd like to attend. Tom
Reply With Quote
  #5  
Old 12-26-2016, 09:49 AM
James Bowler James Bowler is offline
Member
 
Join Date: Apr 2010
Location: Richmond Va
Posts: 203
Default

Sorry i just re looked at the dates . I cannot make it . Someday i will make it to your Meet Will .
James

Last edited by James Bowler; 12-26-2016 at 09:52 AM.
Reply With Quote
  #6  
Old 12-26-2016, 10:08 AM
sdduke sdduke is offline
Member
 
Join Date: Dec 2016
Location: Norcross GA
Posts: 4
Default

I'd like to attend too.

Let me know if there is still room.

I am a complete novice if that is okay!

Thanks

David
__________________
David Duke
Reply With Quote
  #7  
Old 12-26-2016, 10:31 AM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 3,089
Default

Gentlemen, I have reached the sought after attendance figure, and I am surprised by the interest!
If you feel sure that you can attend at the listed date, please PM me, and I will add your name to a waiting list.
I appreciate all the interest.
__________________
Will

Last edited by RockHillWill; 12-26-2016 at 10:56 AM.
Reply With Quote
  #8  
Old 12-26-2016, 10:59 AM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 3,089
Default

The response has been more that anticipated, Thanks to all.

David, I do have you on the waiting list.
__________________
Will
Reply With Quote
  #9  
Old 12-26-2016, 12:19 PM
bobadame bobadame is offline
MetalShaper of the Month Feb 2015
 
Join Date: May 2009
Location: Fort Collins, Colorado
Posts: 1,189
Default

As it turns out I'm sorry that I won't be able to attend this year so please give my spot to the next person on the list. Have fun folks!
__________________
Bob

Don't believe everything you think.
Reply With Quote
  #10  
Old 12-26-2016, 02:40 PM
sdduke sdduke is offline
Member
 
Join Date: Dec 2016
Location: Norcross GA
Posts: 4
Default

Quote:
Originally Posted by RockHillWill View Post
The response has been more that anticipated, Thanks to all.

David, I do have you on the waiting list.

Thank you!
__________________
David Duke
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.