#1
|
||||
|
||||
1934 Plymouth PE Truck Fender
Need a simple buck which will reverse ?? for the rear fenders of the Pickup I'm restoring, it came with 37/8 fenders which are completely wrong. Fortunately I'm also working on a 33 coupe that I can get contours data from. The build that this thread refers to can be found here http://www.allmetalshaping.com/showthread.php?t=12747
IMG_0513.jpg IMG_0515.jpg IMG_0516.jpg IMG_0517.jpg IMG_0518.jpg IMG_0519.jpg The sheet represents the bed side to give a datum to work from. IMG_0522.jpg IMG_0521.jpg These stations are made from 5/8" x 0.08" aluminium flat IMG_0528.jpg The plan is to form a set of profile gauges, cut a base and back board bracket them together, cut a curved to the wheel arch profile less the material for the rolled edge. Fix the curved piece to the base board and screw the stations in position, they will probably need to have radial support on the inside but time will tell.
__________________
Tom Poulter Follow the Dream - Sideways - - But don't fall-off the edge 'good to know you guys care' https://ctrestorations.com/ Last edited by Z5Roadster; 10-15-2016 at 03:11 PM. Reason: Truck build link added |
Thread Tools | Search this Thread |
Display Modes | |
|
|